Specifications - Bosch GIS 1000 C Professional Original Instructions Manual

OBJ_BUCH-2452-005.book Page 7 Thursday, September 22, 2016 7:55 PM
 Caution! When using the measuring tool with
Bluetooth®, interference with other devices and sys-
tems, airplanes and medical devices (e.g., cardiac
pacemakers, hearing aids) may occur. Also, the possi-
bility of humans and animals in direct vicinity being
harmed cannot be completely excluded. Do not use the
measuring tool with Bluetooth® in the vicinity of medi-
cal devices, petrol stations, chemical plants, areas
where there is danger of explosion, and areas subject
to blasting. Do not use the measuring tool with Blue-
tooth® in airplanes. Avoid operation in direct vicinity of
the body over longer periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch GmbH is under license.
Product Description and

Specifications

Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended Use
The measuring tool is intended for contactless measurement
of surface temperature, ambient temperature and relative hu-
midity. It calculates the dew point temperature and indicates
thermal bridges and mould risk. Mould spores cannot be de-
tected with the measuring tool. It can however help with early
detection of conditions in which mould spores can form.
The measuring tool must not be used for temperature meas-
urement on persons and animals or for other medical pur-
poses.
The measuring tool is not suitable for surface temperature
measurement of gases. Temperature measurement of liquids
is possible only with the help of a conventional thermocouple
(connection type K), which can be connected to the measur-
ing tool via the interface provided 25.
The light of this measuring tool is intended to illuminate the di-
rect work area of the measuring tool in order to take pictures.
It is not suitable for household room illumination.
The laser points must not be used as a laser pointer. They are
used only to mark the measuring surface.
Bosch Power Tools
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Cover for micro USB socket/thermocouple connection
(type K)
2 Exit opening for laser beam
3 Unlocking button for battery pack/battery adapter/
battery lid
4 Measure button/On button
5 Humidity and ambient temperature sensor
6 Serial number
7 Laser warning label
8 Micro USB cable
9 Save/send by ® button
10 Right-hand function button
11 Right-hand arrow button
12 On/Off button
13 Downward arrow button/Reduce zoom level
14 Light on/off button
15 Left-hand arrow button
16 Upward arrow button/Increase zoom level
17 Left-hand function button
18 Display
19 Protective cap for humidity and ambient temperature
sensor
20 Fixture for carrying strap
21 Protective cap for infrared reception lens
22 Camera
23 Reception lens for infrared radiation
24 Light
25 Type K connection for thermocouple
26 Micro USB socket
27 Battery adapter cover
28 Battery adapter sealing cap
29 Battery port
30 Battery pack*
31 Battery lid
* The accessories illustrated or described are not included as
standard delivery.
English | 7
1 609 92A 3FX | (22.9.16)