Product Description And Specifications; Product Features - Bosch Professional GLM 80 Manual

1.800.544.2843
Safety instructions for chargers
This charger is not intended for
u
use by children or persons with
physical, sensory or mental limita-
tions or a lack of experience or
knowledge. This charger can be
used by children aged 8 or older
and by persons who have physical,
sensory or mental limitations or a
lack of experience or knowledge if
a person responsible for their
safety supervises them or has in-
structed them in the safe opera-
tion of the charger and they under-
stand the associated dangers. Oth-
erwise, there is a risk of operating er-
rors and injuries.
Supervise children during use,
u
cleaning and maintenance. This will
ensure that children do not play with
the charger.
Do not expose the charger to rain or wet condi-
tions. Water entering a power tool will increase the risk of
electric shock.
Charge the measuring tool only with the supplied
u
charger.
Keep the charger clean. Dirt poses a risk of electric
u
shock.
Always check the charger, cable and plug before use.
u
Stop using the charger if you discover any damage. Do
not open the charger yourself, and have it repaired
only by a qualified specialist using only original re-
placement parts. Damaged chargers, cables and plugs
increase the risk of electric shock.
Do not operate the charger on an easily ignited sur-
u
face (e.g. paper, textiles, etc.) or in a flammable envir-
onment. There is a risk of fire due to the charger heating
up during operation.
In case of damage and improper use of the battery, va-
u
pours may also be emitted. Ensure the area is well-vent-
ilated and seek medical attention should you experience
any adverse effects. The vapours may irritate the respirat-
ory system.
www.calcert.com
15
10 20
5 25
0 30
Product Description and
Specifications
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances and inclines, and for calculating
areas and volumes.
The measuring tool is suitable for indoor and outdoor use.

Product features

The numbering of the product features refers to the diagram
of the measuring tool on the graphics page.
(1) Display
(2) Measuring button
(3) Button for grade measurement/calibration
(4) Button for changing function/basic settings
(5) Minus button
A)
(6) Button for results/timer function
(7) Button for list of measured values/saving constant
(8) Button for memory deletion/switching on or off
(9) Measuring pin
(10) Reference level selection button
(11) Plus button
(12) Button for distance, area and volume measurement
(13) Charging socket cover
(14) Micro USB port
(15) Carrying strap lug
(16) Laser beam output
(17) Reception lens
(18) Serial number
(19) 1/4" thread
(20) Laser warning label
(21) Charging connector
(22) Micro USB cable
B)
(23) Charger
(24) Protective bag
B)
(25) Measuring rail
B)
(26) Locking lever for measuring bar
B)
(27) Tripod
B)
(28) Laser viewing glasses
B)
(29) Laser target plate
A) Press and hold a button to activate its additional function.
B) Accessories shown or described are not included with the
product as standard.
Display elements
(a) Measured value lines
(b) "ERROR" indicator
(c) Result line
A)
A)
A)
A)
sales@calcert.com