BioMonitor SmartLead
11.2 Maintenance by Qualified Individuals
The following activities should only be undertaken by PC support (IT) personnel, equipment
technicians or those with suitable training.
11.3 Companion Software Updates
•
Perform a backup of the data folders to a separate drive as a precaution.
•
Click on the Patch/Update link provided in the email or as given on the
•
Download the Patch/Update file.
•
To install the Patch/Update, click "Run" on the dialog box. No password is required.
Attention
All EMG sensors should be fully charged before a firmware update is performed.
12 Troubleshooting
Symptom: Problem with the EMG Sensor recognizing the SmartLead
Possible Reason
SmartLead is disconnected or loose
Firmware in the Sensor is outdated. The EMG
Sensor Status LED may be solid Yellow.
P852 Rev B (April 2019)
Remedial Action
Check that the SmartLead is inserted Fully
Sensor firmware is periodically updated to support
newly designed SmartLeads. Make sure you have
installed the latest version of MR3 and run a
firmware update if needed.
Noraxon
website.
15