BioMonitor SmartLead
6 Preparing the Product for Use
6.1 Unpacking and Component Identification
BioMonitor SmartLead User Manual (part #852A) This document
6.2 Component Inputs, Outputs and Indicators
1) EMG Sensor (front and top edge)
2) EMG Sensor (back and bottom
edge)
P852 Rev B (April 2019)
Ultium BioMonitor SmartLead (Part
#852)
Additional contents not illustrated
Smart Lead Connector – Connector
for smart leads to change function of
EMG sensor.
Status LED – Sensor operational
indicator flashes green when
measuring. Solid Yellow when
charging.
Power Button – Power the sensor
On/Off. Hold for 3+ seconds for a
hard reset.
Charger Contacts – Sensor battery is
charged and sensor data is
exchanged through these points.
Serial Number – Unique 5-character
serial number which identifies each
EMG sensor.
5