Exceptional Functions/Situations (Error Messages); Shutdown After Use; Storage And Protecting Between Usages; Accessories And Optional Modules - Noraxon Ultium EMG BioMonitor SmartLead User Manual

BioMonitor SmartLead

8.3 Exceptional Functions/Situations (error messages)

Please see the appropriate Noraxon system's hardware manual for possible error messages.

8.4 Shutdown after Use

At the end of the day:
•
Place all EMG sensors inside the sensor docking station(s).
•
Tap the Sensor Power touch button on the Receiver to power all sensors off.

8.5 Storage and Protecting Between Usages

For extended storage or when travelling:
•
Place all sensors into the sensor docking station and power them off (Slide your finger
across the sensor power touch button. When the sensors are shutdown they will stop
blinking completely. The sensors are reactivated by briefly charging them).
•
Position all components inside the system travelling case according to their prepared
cavities. (see photo below)

9 Accessories and Optional Modules

P852 Rev B (April 2019)
13