Accessories; Cleaning; Safety Precautions When Cleaning; Cleaning By Users - Noraxon Ultium EMG BioMonitor SmartLead User Manual

BioMonitor SmartLead

9.1 Accessories

The BioMonitor SmartLeads do not have any corresponding accessories.

10 Cleaning

10.1 Safety Precautions When Cleaning

WARNING
Only use a damp cloth with mild soap and water or isopropyl alcohol to clean the
bottom of the Ultium Sensors.
Do not immerse Ultium Sensors in any water or liquid.

10.2 Cleaning by Users

The BioMonitor SmartLead is not constructed to withstand repeated application of any
disinfectant solution. Likewise, the BioMonitor SmartLead is not warranted against exposure to
any of the conventional forms of sterilization.

11 Maintenance

11.1 Device Software (firmware) updates

The internal program (firmware) inside the various Ultium devices can be updated via MR3. The
user will be notified within the Ultium System hardware setup if an update is required. Ensure that
all sensors are placed in the Ultium charging doc and that the charging doc is connected to the
Ultium receiver prior to initiating the firmware update. If you start the update prior to completing
this step, you may need to update again (firmware update button will still be present in hardware
setup).
P852 Rev B (April 2019)
14