Table of Contents
Advertisement
Linear Force SmartLead
8 Operating Instructions
8.1 Safety Information Summary
Strictly follow all safety practices given in section 4 of this manual. The most critical ones are
repeated here.
CAUTIONS
•
Never use the Noraxon Ultium System on a person with an implanted pacemaker
•
Never operate the Noraxon Ultium System within 1 meter of any critical medical device
8.2 Normal Functions with Interface to a PC
When used with the companion software the Linear Force SmartLead will display and record a
signal in lbf.
Consult the user manual for the companion software for descriptions of the setup, playback and
analysis of the data acquired by the Ultium system.
8.3 Exceptional Functions/Situations (error messages)
Please see the appropriate Noraxon system's hardware manual for possible error messages.
8.4 Shutdown after Use
At the end of the day:
•
Place all EMG sensors inside the sensor docking station(s).
•
Tap the Sensor Power touch button on the Receiver to power all sensors off.
8.5 Storage and Protecting Between Usages
For extended storage or when travelling:
•
Place all sensors into the sensor docking station and power them off (Slide your finger
across the sensor power touch button. When the sensors are shutdown they will stop
blinking completely. The sensors are reactivated by briefly charging them).
P-802 Rev B (May 2019)
14
Advertisement
Table of Contents
