9.5
Installing Parallel Port Interface Kit (UE-403159)
1. Contents
Qty.
1
1
1
1
2. Installation
Note:
Before starting the installation, prepare the Master Firmware Card with the appropriate Optional Firmware. (See page 48)
(2)
(1)
(3)
(7)
(8)
(7)
(10)
(11)
Description
Parallel Port Interface Assembly
Ribbon Cables
Screw, 3x8
Print/Twain Scanner Driver Diskette
(6)
(5)
(7)
(9)
Part No.
DZMA001832
DZHP002970
XTB3+8J
DZQW000112
(1) Turn the Power Switch to the OFF (O) position.
(2) Disconnect the Power Cord.
(3) Disconnect the Telephone Line Cable.
(4) Open the Control Panel.
(5) Remove 1 Screw.
(6) Remove the Memory Card Cover.
(7) Remove 4 Screws.
(8) Remove the Sub Rear Cover.
(9) Remove 3 Screws.
(10) Remove the Rear Cover.
(11) Break off the protective tab.
Note:
Order a Protective Bracket (P/N: DZNE000019) to cover up
the opening if the interface is removed.
Options and Supplies
Remarks
-
-
-
Floppy Disk 2HD
269