(33)
(36)
(37)
(33) Release Latch Hook.
(34)
(34) Carefully lift the LCD Unit (215).
(35) Disconnect Connector CN42 on the PNL PC Board.
(36) Remove the LCD Unit (215).
(35)
(37) Release 4 Latch Hooks on the back of the LCD Holder.
(38)
(38) Remove the LCD Holder (232).
Cleaning ADF Roller (323), Pre-Feed Roller (325), Feed
Roller (328), Eject Roller (330) and the Scanner Glass (341)
(1) Open the Control Panel Unit.
(2) Clean the ADF Roller (323), Pre-Feed Roller (325),
Feed Roller (328), Eject Roller (330) and the Scanner Glass
(341) with a soft cloth, soaked with isopropyl alcohol.
Disassembly
27