Panasonic Panafax UF-885 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Fax Machine
  5. UF 885 - Panafax B/W Laser
  6. Service manual
Panasonic Panafax UF-885 Service Manual

Panasonic Panafax UF-885 Service Manual

Hide thumbs Also See for Panafax UF-885:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Order Number : MGCS981201C1
H13
Facsimile
UF-885 / 895
© 1999 Matsushita Graphic Communication Systems, Inc.
All rights reserved. Unauthorized copying and distribution is
a violation of law.

Advertisement

Table of Contents
loading

Related Manuals for Panasonic Panafax UF-885

Summary of Contents for Panasonic Panafax UF-885

  • Page 1 Order Number : MGCS981201C1 Facsimile UF-885 / 895 © 1999 Matsushita Graphic Communication Systems, Inc. All rights reserved. Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    Table of Contents 1 General Description ........ 5 2.11 Fan Duct (520), Printer Motor (650), Overview...........5 Motor Bracket (641) ....... 39 General Features and Functions ....5 2.12 Laser Unit (429), General Specifications......7 Feed Roller (618), Paper Feed Roller (746), Scanner Specifications ......9 Clutch Gear Assembly (660), Printer Specifications ......10 Paper Feed Solenoid (744),...
  • Page 3 Table of Contents 5 Service Modes ........152 9 Options and Supplies ......262 Service Mode Table......152 Options and Supplies ......262 Service Mode 1 Installing Optional (Function Parameter Setting)....153 Feeder Unit (UE-409057) ..... 264 Service Mode 3 Installing Optional (Printout of Lists, Feeder Unit (UE-409056) .....
  • Page 4 Chapter 1 General Description...

  • Page 5: General Description

    1 General Description Overview This section covers the features and specifications of the plain paper facsimile transceiver "Panasonic UF-885/895". This fax machine can transmit and receive on the Public Switched Telephone Network (PSTN) in modes conforming to ITU-T / CCITT Group 3 recommendations.
  • Page 6 General Description 13. Multi-file Transmission It is possible to store multiple documents, each of which could be transmitted to different destinations, into the document memory. Then the unit will transmit them sequentially (max. number of files: 30 files [UF-885], 70 files [UF-895]). 14.

  • Page 7: General Specifications

    Panasonic UF-885 / 895 28. Receive to Memory Users can set the unit to store incoming documents into its available memory. Later, using a 4-digit password, stored documents can be printed when the user is present. This function helps ensure that important documents are not read or lost while they are sitting unattended in the fax tray.
  • Page 8 General Description 3. Input Level -5 to -43 dbm 4. Output Level 0 to -15 dbm 5. Control Procedure ITU-T/CCITT Rec. T.30 MGCS Proprietary short protocol 6. Modem Speed 33600 - 2400 bps @2400 step (QAM with TCM) V.17 14400, 12000, TC9600, TC7200 bps (QAM with TCM) V.33 14400, 12000 bps (QAM with TCM) V.29...

  • Page 9: Scanner Specifications

    Panasonic UF-885 / 895 13. Automatic Dialing Dialing Signal 10 PPS/20 PPS/DTMF Dialing Method One-Touch Dialing Up to 40 keys (including 8 programmable keys) Abbreviated Dialing Up to 160 stations Manual Number Dialing Up to 70 stations (UF-895), Up to 32 stations (UF-885)

  • Page 10: Printer Specifications

    General Description 3. Scanning Method Horizontal Sheet Feeding with CCD type image sensor Vertical Stepper Motor feeding 4. Effective Scanning Width 9.9 in (252 mm) 5. Scanning Resolution Standard 203 dpi x 98 lpi (8 pels/mm x 3.85 lines/mm) Fine 203 dpi x 196 lpi (8 pels/mm x 7.7 lines/mm) S-Fine 203 dpi x 391 lpi (8 pels/mm x 15.4 lines/mm)

  • Page 11: Power

    Panasonic UF-885 / 895 Power 1. Power Requirement 99~138 VAC, 47~63Hz, Single Phase 2. Power Consumption Approx. 470 W Reception Approx. 460 W Copy Approx. 470 W Transmission Approx. 23 W Standby (Sleep Mode: On) Approx. 1.2 W/H Standby (Energy-Saver Mode: On) Approx.
  • Page 12 General Description 1.8.1 External View...
  • Page 13 Panasonic UF-885 / 895 1.8.2 Control Panel (UF-885)
  • Page 14 General Description 1.8.3 Control Panel (UF-895)

  • Page 15: Function Table

    Panasonic UF-885 / 895 Function Table Items UF-885 UF-895 MAIN SPECIFICATION ← Compatibility ← Modem Speed (kbps) 33.6 - 2.4 ← Coding Scheme MH/MR/MMR/JBIG ← ECM (Conforms to ITU-T/CCITT) Yes (MMR/JBIG) ← ← Short Protocol Yes (B, D) ← Transmission Speed 3 seconds (ITU-T Image No.1)
  • Page 16 General Description Items UF-885 UF-895 ← Halftone (Photo) 64 levels Error Diffusion, Fast and Quality Mode ← Super Fine (dpi x lpi) 203 x 391 406 x 391 ← Smoothing Yes (Copy and Fax) No (PC Printing) MULTIPLE OPERATIONS ← Multiple Operation ←...
  • Page 17 Panasonic UF-885 / 895 Items UF-885 UF-895 ← Header / Total Page Print ← Comm. Journal Yes (w / Image) ← Transaction Journal Yes (100) ← Last Individual XMT Journal ← View Mode LIST PRINTOUTS ← One-Touch List ← Abbr. No. List ←...

  • Page 18: Disassembly Instruction

    Paper Cassette Document Return Tray (1018) (138 & 139) Recording Paper Tray (1106) Control Printer Cover Panel Unit (122) Sub Rear Cover Open Printer Cover Open Control Rear Cover Rear Cover Toner Sensor Pre-Feed Cover (223) Separation Rubber (229) (114) Panel Unit (XXX) (XXX)

  • Page 19: Paper Cassette (1018)

    Disassembly Power Cord (1108), Telephone Line Cable (1107), Document Return Tray (138 and 139), Recording Paper Tray (1106), Paper Cassette (1018) (1) Turn the Power Switch "OFF". (2) Disconnect the Power Cord (1108). (3) Disconnect the Telephone Line Cable (1107). (4) Remove the Document Return Tray (138 and 139).

  • Page 20: Speaker (133)

    Panasonic UF-885 / 895 Sub Rear Cover (114), Rear Cover (108), Left Side Cover (107), Front Cover (105), Speaker (133) (1) Open the Printer Cover (122). (2) Remove the Toner Cartridge. (3) Open the Control Panel Unit. (4) 5 Screws (B1).
  • Page 21 Disassembly (8) Close the Control Panel Unit. (10) (10) (10) (9) 3 Screws (B1). (10) Hold in the center and release the Latch Hook. (11) Remove the Left Side Cover (107). (11) (12) Open the Control Panel Unit. (13) 2 Screws (B1). (14) Release the hook and remove the Front Cover (105).

  • Page 22: Paper Guide Cover (110), Transmit Guide (117), Sns Assembly (121)

    Panasonic UF-885 / 895 Paper Guide Cover (110), Transmit Guide (117), SNS Assembly (121) (1) Remove the Front Cover (105) and the Rear Cover (108) (Refer to 2.3). (2) 2 Screws (19). (3) Remove the Paper Guide Cover (110). (4) 5 Screws (19).
  • Page 23 Disassembly (9) 1 Screw (19). (11) (10) Release two Latch Hooks. (11) Remove the SNS Assembly (121). (10)

  • Page 24: Low Voltage

    Panasonic UF-885 / 895 Low Voltage Power Supply Unit (502), FCB PC Board (522), LCU PC Board (519), LPC PC Board (555), Control Panel Unit, PNL PC Board (214) (1) Remove the Left Side Cover (107) and the Rear Cover (108) (Refer to 2.3).
  • Page 25 Disassembly (11) Close the Control Panel Unit. (12) 2 Screws (19). (11) (13) Remove the LCU Bracket (512). (12) (13) (14) Disconnect Connector CN25 on the LCU PC Board. (15) 2 Screws (C8). (16) (15)x2 (16) Remove the LCU PC Board (519). (14) (17) 3 Screws (19).
  • Page 26 Panasonic UF-885 / 895 (22) 1 Screw (19) and remove the Ground Strap (540). (25) (24) (23) Disconnect Connector CN11 on the FCB PC Board. (24) Remove the Harness from the clamp. (25) Remove the Control Panel Unit. (23) (22) (26) Remove the Battery Holder (1114) Assembly.
  • Page 27 Disassembly (33) Release Latch Hook. (34) (34) Carefully lift the LCD Unit (215). (33) (35) Disconnect Connector CN42 on the PNL PC Board. (36) Remove the LCD Unit (215). (36) (35) (37) Release 4 Latch Hooks on the back of the LCD Holder. (38) (38) Remove the LCD Holder (232).

  • Page 28: Transmitter Chassis (301), Scanner Assembly (340), Led Array Assembly (333), Verification Stamp Assembly

    Panasonic UF-885 / 895 Transmitter Chassis (301), Scanner Assembly (340), LED Array Assembly (333), Verification Stamp Assembly (1) Remove the Front Cover (105), Rear Cover (108) (Refer to 2.3) and the Control Panel Unit (Refer to 2.5). (2) Remove all the harnesses from the clamps.
  • Page 29 Disassembly (10) 6 Screws (19). (10)x6 (11) Remove the LED Array Bracket 1 (332) and LED Array Bracket 2 (351). (11) (12) 8 Screws (9H). (13) Remove two LED Array Assemblies (333). Note: UF-885 has only one LED Array Assembly. (13) (12) (14) 1 Screw (19).

  • Page 30: Adf Roller

    Panasonic UF-885 / 895 ADF Roller (323), Pre-Feed Roller (325), Eject Roller (330), Feed Roller (328), Transmission Gear Assembly, Transmit Motor (346) (1) Remove the Front Cover (105), Rear Cover (108) (Refer to 2.3), Control Panel Unit (Refer to 2.5) and the Transmitter Chassis (301) Assembly (Refer to 2.6).
  • Page 31 Disassembly (11) Remove the Scanner Glass (341). (12) (12) Remove the Stamp Head Assembly. (11) Note: Before reassembling, clean both sides of the Scanner Glass (341) with a soft cloth, soaked with isoproyl alcohol. (13) Release the hook on the drive gear. (14) Remove the B31B61 Drive Gear (314).
  • Page 32 Panasonic UF-885 / 895 (18) 6 Screws (19). (19) Remove the Motor Bracket A (304) with the Transmission (19) Gear Assembly. (18) Note: Apply Molykote EM-502L Grease to the Transmit Motor (346) Gear, B35 Drive Gear (Feed Roller) (326) and B35 Drive Gear (Eject Roller) (326).

  • Page 33: Toner Sensor (639), Timing Sensor (610), Bias Transfer Roller (630)

    Disassembly Toner Sensor (639), Timing Sensor (610), Bias Transfer Roller (630) (1) Open the Printer Cover (122) (Refer to 2.3). (2) 2 Screws (19). (3) Remove the Toner Sensor Cover (640). (4) 1 Screw (19). (5) Remove the Toner Sensor Assembly. (6) Disconnect Connector and remove the Harness from the Upper Transport Guide.
  • Page 34 Panasonic UF-885 / 895 (13) 2 Screws (19). (14) Remove the Upper Transfer Guide (635). (13) (14) (15) Release 2 Latch Hooks. (16) Remove the Timing Sensor (610). (16) (15) (17) 2 Screws (19). Black (17) (18) Remove the BTR Guide (629).

  • Page 35: Fuser Unit (431), Fuser Lamp (408), Thermistor Assembly (405), Paper Exit Sensor (610)

    Disassembly Fuser Unit (431), Fuser Lamp (408), Thermistor Assembly (405), Paper Exit Sensor (610) (1) Remove the Left Side Cover (107) (Refer to 2.3). (2) Disconnect 2 Connectors. (3) Disconnect the Relay Connector. (4) 1 Screw (19). (5) Remove the Ground Strap (653). (4) (5) (6) 3 Screws (4N).
  • Page 36 Panasonic UF-885 / 895 (14) 2 Screws (23). (14) (15) Remove the Fuser Cover (401). (15) (16) Remove the Paper Exit Sensor (610). (17) Disconnect Connector. (17) (16)

  • Page 37: Fuser Roller (414), Pressure Roller (409), Eject Roller (422)

    Disassembly 2.10 Fuser Roller (414), Pressure Roller (409), Eject Roller (422) (1) Remove the Fuser Unit (431) (Refer to 2.9). (2) 2 Pressure Springs (412). (3) 2 C-Rings (418). (4) Remove the E24 Drive Gear (417). (5) Remove 2 P17L6.8 Bushings (416). (6) Remove the Fuser Roller (414).
  • Page 38 Panasonic UF-885 / 895 (10) Remove the Pressure Roller (409). Caution: (10) Do not scratch the surface of the Pressure Roller when removing or re-installing it. (11) Remove the Black and the White Bushings (423) (424). (12) Remove the Eject Roller (422).

  • Page 39: Fan Duct (520), Printer Motor (650), Motor Bracket (641)

    Disassembly 2.11 Fan Duct (520), Printer Motor (650), Motor Bracket (641) (1) Remove the the Front Cover (105), Rear Cover (108) (Refer to 2.3), Control Panel Unit and FCB Bracket (523) (Refer to 2.5). (2) 2 Screws (19). (3) Remove the Fan Duct (520). (4) 2 Screws (19).
  • Page 40 Panasonic UF-885 / 895 (12) 1 Screw (19). (12) (14) (13) Remove the Transfer Ground Spring (649). (13) (14) 7 Gears. (14) (14) Caution: When re-installing the gear (labeled “6”), be sure to install the washer on the shaft first.

  • Page 41: Laser Unit

    Disassembly 2.12 Laser Unit (429), Feed Roller (618), Paper Feed Roller (746), Clutch Gear Assembly (660), Paper Feed Solenoid (744), Fan Unit (622) (1) Remove the the Front Cover (105), Rear Cover (108) (Refer to 2.3), Paper Guide Cover (110) (Refer to 2.4), Control Panel Unit (Refer to 2.5), and Motor Bracket and Gear Assembly (Refer to 2.11).
  • Page 42 Panasonic UF-885 / 895 (10) Remove the E-Ring (5Z). (11) Remove the Clutch Gear Assembly (660). (11) (10) (12) 2 Screws (23). (12) (13) Remove the Paper Feed Rollers (746). Note: The Paper Feed Rollers can be accessed from the bottom of the machine after removing the Paper Cassette.

  • Page 43: Ils Pc Board (621), No Paper Actuator (609), Catch Magnet (730)

    Disassembly 2.13 ILS PC Board (621), No Paper Actuator (609), Catch Magnet (730) (1) Remove the the Front Cover (105), Rear Cover (108) (Refer to 2.3), Paper Guide Cover (110) (Refer to 2.4), Control Panel Unit (Refer to 2.5), and Motor Bracket and Gear Assembly (Refer to 2.11).

  • Page 44: High Voltage Power Supply (Hvps) (506)

    Panasonic UF-885 / 895 2.14 High Voltage Power Supply (HVPS) (506) (1) Remove the Front Cover (105) (Refer to 2.3). (2) 1 Screw (19). (3) Pull out the High Voltage Power Supply (HVPS) (506). (4) Disconnect Connector CN39 on the High Voltage Power Supply (HVPS).

  • Page 45: 2.15 Screw Identification Template

    Disassembly 2.15 Screw Identification Template...

  • Page 46: Maintenance, Adjustments And Check Points

    Panasonic UF-885 / 895 3 Maintenance, Adjustments and Check Points Required Tools Tool Tool Soft Cloth Pliers Isopropyl Alcohol Cotton Swab Phillips Screwdriver (#2) Brush Stubby Phillips Screwdriver (#2) KS-660 - Conductive Grease Blade-tip Screwdriver (3/32 in) Molykote EM-502L Grease (Dow Corning)

  • Page 47: Periodic Maintenance Check List

    Maintenance, Adjustments and Checkpoints Periodic Maintenance Check List The chart outlined below is a general guideline for maintenance. The example list is for an average usage of 50 transmitted and received documents per day. Needless to say, the environmental conditions and actual use will vary these factors. The chart below is for reference only.

  • Page 48: Updating The Firmware

    Panasonic UF-885 / 895 Updating the Firmware Unlike other machines with removable EPROM (Erasable Programmable ROM), this machine is equipped with an F-ROM (Flash ROM). F-ROM offers the flexibility of quick and easy firmware updates, creation of a master firmware card, backup and restore of firmware and machine parameters.

  • Page 49: Adf Pressure

    Maintenance, Adjustments and Checkpoints 3.4.4 Firmware Version UF-895 V02100 Country Code AU : USA AC : Canada Firmware Version (V0.2100) Language Code L : A-English & Spanish M : A-English & C-French Firmware Type A : Standard B : Optional Model Number ADF Pressure •...

  • Page 50: Printer Unit Test

    Panasonic UF-885 / 895 Printer Unit Test 1. You can check the printer with the FCB PCB disconnected from the unit (Sections 2.5). 2. Press the Test Pattern Print Switch (SW401) on the LPC PCB as shown below. LPC PCB...

  • Page 51: General Circuit Diagram

    (342) (342) (333) (121) (555) (335) (333) (ADF) (346) TEST POINTS (522) LV PSU (502) (133) (519) LCD (215) (103) (214)
  • Page 52 (429) (506) (502) (408) (650) (555) (433) (432) (405) (622) (610) (744) (610) (607) (507) (639) (665) (610) (507) (621)
  • Page 53 (953) (555) (952) (928) (728) (744) (944) (730) (930) (748) (931) (731) (931) (731)

  • Page 54: Fcb Pcb

    Panasonic UF-885 / 895 FCB PCB CN10 (DRAM Card) (Flash Memory Card) IC140 (Image Processing Controller) IC20 (Main System Controller) CN12...
  • Page 55 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN1-1 Flash Memory Card Ground CN1-2 IOD[3] Flash Memory Card Data Signal 5V(H) 0V(L) CN1-3 IOD[4] Flash Memory Card Data Signal 5V(H) 0V(L) CN1-4 IOD[5] Flash Memory Card Data Signal 5V(H) 0V(L)
  • Page 56 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN1-13 A[14] Flash Memory Card Address Signal 3V(H) 0V(L) CN1-14 A[15] Flash Memory Card Address Signal 3V(H) 0V(L) CN1-15 nWRL Flash Memory Card Low Enable 3V(H) 0V(L) CN1-16 pMIRQFR1...
  • Page 57 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN1-25 A[5] Flash Memory Card Address Signal 3V(H) 0V(L) CN1-26 A[4] Flash Memory Card Address Signal 3V(H) 0V(L) CN1-27 A[3] Flash Memory Card Address Signal 3V(H) 0V(L) CN1-28 A[2] Flash Memory Card Address Signal 3V(H)
  • Page 58 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN1-37 IOD[11] Flash Memory Card Data Signal 5V(H) 0V(L) CN1-38 IOD[12] Flash Memory Card Data Signal 5V(H) 0V(L) CN1-39 IOD[13] Flash Memory Card Data Signal 5V(H) 0V(L) CN1-40 IOD[14]...
  • Page 59 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN1-49 A[21] Flash Memory Card Address Signal 3V(H) 0V(L) CN1-50 nCS2 Flash Memory Card Address Signal 5V(H) 0V(L) CN1-51 +5V Flash Memory Card +5 VDC Power Supply CN1-52 +12V Flash Memory Card +12 VDC Power Supply +12V...
  • Page 60 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN1-63 nOPM13 Flash Memory Card Flash Memory Card ID CN1-64 nIOD[8] Flash Memory Card Data Signal 5V(H) 0V(L) CN1-65 IOD[9] Flash Memory Card Data Signal 5V(H) 0V(L) CN1-66 IOD[10]...
  • Page 61 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN3-1 nETSW LCU PCB CN25-1 Not Used CN3-2 +5VP LCU PCB CN25-2 +5 VDC Power Supply CN3-3 LCU PCB CN25-3 Ground CN3-4 +24V LCU PCB CN25-4 +24 VDC Power Supply +24V CN3-5 pCMLD...
  • Page 62 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN3-13 HYSIG LCU PCB CN25-13 Not Used CN3-14 pTCKD LCU PCB CN25-14 Not Used CN3-15 pEAKD LCU PCB CN25-15 Not Used...
  • Page 63 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN4-1 DRAM Card Ground CN4-2 DRAM Card Ground CN4-3 DRAM Card +5 VDC Power Supply CN4-4 CID0 DRAM Card H: Card Not Installed L: Card Installed +5V(H) 0V(L) CN4-5 5VIMD[0] DRAM Card...
  • Page 64 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN4-13 5VIMD[8] DRAM Card Data Signal 5V(H) 0V(L) CN4-14 5VIMD[9] DRAM Card Data Signal 5V(H) 0V(L) CN4-15 5VIMD[10] DRAM Card Data Signal 5V(H) 0V(L) CN4-16 5VIMD[11] DRAM Card...
  • Page 65 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN4-25 IMA[4] DRAM Card Address Signal 3V(H) 0V(L) CN4-26 IMA[5] DRAM Card Address Signal 3V(H) 0V(L) CN4-27 IMA[6] DRAM Card Address Signal 3V(H) 0V(L) CN4-28 IMA[7] DRAM Card Address Signal 3V(H) 0V(L)
  • Page 66 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN4-37 nIRAS[5] DRAM Card Low Enable 3V(H) 0V(L) CN4-38 nIRAS[4] DRAM Card Low Enable 3V(H) 0V(L) CN4-39 nIRAS[3] DRAM Card Low Enable 3V(H) 0V(L) CN4-40 nIRAS[2] DRAM Card...
  • Page 67 Maintenance, Adjustments and Checkpoints CN5 (UF-885) Pin No. Signal Name Destination Signal Waveform Function CN5-1 CCD PCB CN30-1 Reset Signal 640 ns CN5-2 FCK1 CCD PCB CN30-2 Shift Register Clock 1 1280 ns CN5-3 FCK2 CCD PCB CN30-3 Shift Register Clock 2 1280 ns CN5-4 CCD PCB CN30-4...
  • Page 68 Panasonic UF-885 / 895 CN5 (UF-895) Pin No. Signal Name Destination Signal Waveform Function CN5-1 CCD PCB CN30-1 Sampling Clock 320 ms CN5-2 FSG CCD PCB CN30-2 Data Transfer Enable Signal 0.87 ms CN5-3 AGND CCD PCB CN30-3 Ground CN5-4 +12V...
  • Page 69 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN7-1 nBPNT SNS PCB CN31-1 Read Point Detection +5V(H) No Document Document 0V(L) CN7-2 nAPNT SNS PCB CN31-2 ADF Document Detection +5V(H) No Document Document 0V(L) CN7-3 +5VP SNS PCB CN31-3 +5 VDC Power Supply (Connector Unplugged) +1.2V...
  • Page 70 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN9-1 +24V LED Array 1-1 +24 VDC Power Supply +24V CN9-2 +24V (For UF-895 LED Array 2-1 +24 VDC Power Supply +24V only) CN9-3 LEDD (For UF-895 LED Array 2-2...
  • Page 71 Maintenance, Adjustments and Checkpoints CN11 Pin No. Signal Name Destination Signal Waveform Function CN11-1 +24V PNL PCB CN40-1 Not Used CN11-2 +5VP PNL PCB CN40-2 +5 VDC Power Supply CN11-3 +5V PNL PCB CN40-3 +5 VDC Power Supply CN11-4 GND PNL PCB CN40-4 Ground CN11-5 GND...
  • Page 72 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN11-13 BATVL PNL PCB CN40-13 Battery Voltage CN12 Pin No. Signal Name Destination Signal Waveform Function CN12-1 nBSTA LPC PCB CN69-1 Serial Interface Data Signal +5V(H) 0V(L) CN12-2 nBSCLK...
  • Page 73 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN12-11 nVDO LPC PCB CN69-11 Laser Drive Print Data Signal +5V(H) White 0V(L) Black CN12-12 GND LPC PCB CN69-12 Ground CN12-13 pBPRST LPC PCB CN69-13 Printer External Reset Signal +5V(H) 0V(L)
  • Page 74 Panasonic UF-885 / 895 CN13 Pin No. Signal Name Destination Signal Waveform Function CN13-1 +24V POW PCB CN32-1 +24 VDC Power Supply +24V CN13-2 +24V POW PCB CN32-2 +24 VDC Power Supply +24V CN13-3 MGND POW PCB CN32-3 Ground CN13-4 MGND...
  • Page 75 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN13-12 nLPOW POW PCB CN32-12 Power Saver Enable Standby 2.4V Power Saver...

  • Page 76: Lpc Pcb

    CN57 CN61 CN62 CN55 CN63 CN54 CN51 CN59 SW401 CN56 CN52 CN67 CN68 CN69...
  • Page 77 Maintenance, Adjustments and Checkpoints CN67 Pin No. Signal Name Destination Signal Waveform Function CN67-1 +24V POW PCB CN33-1 +24 VDC Power Supply +24V CN67-2 +24V POW PCB CN33-2 +24 VDC Power Supply +24V CN67-3 MGND POW PCB CN33-3 Ground CN67-4 MGND POW PCB CN33-4 Ground CN67-5 +5V...
  • Page 78 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN51-3 L+5V LSU P101-3 +5V Power Supply for Laser Drive Circuit +5V (H) PRINTING 0V (L) CN51-4 GND LSU P101-4 Ground CN51-5 nLDON LSU P101-5 Laser Control Signal...
  • Page 79 Maintenance, Adjustments and Checkpoints CN52 Pin No. Signal Name Destination Signal Waveform Function CN52-1 +24VM HVPS CN39-1 +24 VDC Power Supply +24V (H) 0V (L) CN52-2 nCR0 HVPS CN39-2 Charge Control AC Output +24V (H) 0V (L) CN52-3 nCR1 HVPS CN39-3 Charge Control DC Output +24V (H) 0V (L)
  • Page 80 Panasonic UF-885 / 895 CN55 Pin No. Signal Name Destination Signal Waveform Function CN55-1 +24VM Paper Feed Solenoid +24 VDC Power Supply +24V (H) 0V (L) CN55-2 nADF1 Paper Feed Solenoid Paper Feed Roller Solenoid Control Signal +24V (H) 0V (L) CN56 Pin No.
  • Page 81 Maintenance, Adjustments and Checkpoints CN57 Pin No. Signal Name Destination Signal Waveform Function CN57-1 nCCHK1 Cassette Detect Sensor No Cassette Detection Signal +5V (H) No Cassette 0V (L) CN57-2 NC Not connected CN57-3 GND Cassette Detect Sensor Ground CN58 Pin No. Signal Name Destination Signal Waveform...
  • Page 82 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN58-9 +5V CTS2 CN81-9 +5 VDC Power Supply CN58-10 GND CTS2 CN81-10 Ground CN58-11 nOP CTS2 CN81-11 250 Sheets Feeder Unit Detection Signal +5V (H) No Feeder Unit...
  • Page 83 Maintenance, Adjustments and Checkpoints CN59 Pin No. Signal Name Destination Signal Waveform Function CN59-1 nMMP3 Printer Motor Rotate Signal +5V (H) Rotate 0V (L) CN59-2 nMMP2 Printer Motor Motor Ready Signal +5V (H) Ready 0V (L) CN59-3 +24VM Printer Motor +24 VDC Power Supply +24V (H) 0V (L)
  • Page 84 Panasonic UF-885 / 895 CN62 Pin No. Signal Name Destination Signal Waveform Function CN62-1 GND Toner Sensor CN114-1 Ground CN62-2 TONER Toner Sensor CN114-2 Remaining Toner Level Signal Analog Signal CN62-3 +5V Toner Sensor CN114-3 +5 VDC Power Supply CN62-4 nRSEN...

  • Page 85: 3.10 Lcu Pcb

    Maintenance, Adjustments and Checkpoints 3.10 LCU PCB...
  • Page 86 Panasonic UF-885 / 895 CN20 Pin No. Signal Name Destination Signal Waveform Function CN20-1 NC Not Used CN20-2 NC Not Used CN20-3 L2(T) Telephone Line Line Signal CN20-4 L1(R) Telephone Line Line Signal CN21 Pin No. Signal Name Destination Signal Waveform...
  • Page 87 Maintenance, Adjustments and Checkpoints Pin No. Signal Name Destination Signal Waveform Function CN23-3 HLIN2 SRU PCB CN90-2 Line Signal for the Fax Handset CN23-4 NC SRU PCB CN90-3 Not Connected CN23-5 AI SRU PCB CN90-4 Switch Hook Signal Off Hook +5V (H) On Hook 0V (L)

  • Page 88: Sru Pcb (Optional)

    Panasonic UF-885 / 895 3.11 SRU PCB (Optional) CN91 CN90...
  • Page 89 Maintenance, Adjustments and Checkpoints CN91 Pin No. Signal Name Destination Signal Waveform Function CN91-1 NC Not Connected CN91-2 MIC (+) Telephone Handset CN Handset Microphone CN91-3 RCV (+) Telephone Handset CN Handset Receiver CN91-4 RCV (-) Telephone Handset CN Handset Receiver CN91-5 MIC (-) Telephone Handset CN Handset Microphone...

  • Page 90: Low Voltage Power Supply Pcb (Pow)

    Panasonic UF-885 / 895 3.12 Low Voltage Power Supply PCB (POW) CN35 C105 CN33 T101...
  • Page 91 Maintenance, Adjustments and Checkpoints CN32 Refer to FCB PCB CN13. CN33 Refer to LPC PCB CN1. CN34 Pin No. Signal Name Destination Signal Waveform Function CN34-1 LIVE ACI PCB AC Input (Black-Live) CN34-2 NEUTRAL ACI PCB AC Input (White-Neutral) CN35 Pin No.

  • Page 92: High Voltage Power Supply Pcb (Hvps)

    Panasonic UF-885 / 895 3.13 High Voltage Power Supply PCB (HVPS) T501 T401 T201 T301 T101 CN39...
  • Page 93 Maintenance, Adjustments and Checkpoints High Voltage Output Pin No. Signal Name Destination Signal Waveform Function Transfer Bias Transfer Roller (1) Transfer Current: (+3 uA) +3 A (2) Cleaning Voltage: (-800 V) -800V Charge Current: 450 µA Charge Bias Charge Roller (AC 400 Hz Sine Wave) -650 V &...

  • Page 94: Cst2 Pcb (Option)

    Panasonic UF-885 / 895 3.14 CST2 PCB (Option) CN81 CN86 CN83 CN82 CN85 CN84...
  • Page 95 Maintenance, Adjustments and Checkpoints CN81 Refer to LPC PCB CN58. CN82 Pin No. Signal Name Destination Signal Waveform Function CN82-1 nSDO CST3PCB CN101-1 500 Sheet Cassette Interface TX Data +5V(H) 0V(L) CN82-2 nSDI CST3PCB CN101-2 500 Sheet Cassette Interface RX Data +5V(H) 0V(L) CN82-3 nSCK...
  • Page 96 Panasonic UF-885 / 895 Pin No. Signal Name Destination Signal Waveform Function CN82-12 Not Connected CN83 Pin No. Signal Name Destination Signal Waveform Function CN83-1 +24VM Paper Feed Solenoid +24 VDC Power Supply +24V CN83-2 nADF2 Paper Feed Solenoid Feed Roller Drive Clutch Control Signal...
  • Page 97 Maintenance, Adjustments and Checkpoints CN85 Pin No. Signal Name Destination Signal Waveform Function CN85-1 nCCHK2 Cassette Detect Sensor Paper Cassette Detection +5V (H) No Cassette 0V (L) CN85-2 NC Not Connected CN85-3 GND Cassette Detect Sensor Ground CN86 Pin No. Signal Name Destination Signal Waveform...

  • Page 98: Cst3 Pcb (Option)

    Panasonic UF-885 / 895 3.15 CST3 PCB (Option) CN104(W) CN101...
  • Page 99 Maintenance, Adjustments and Checkpoints CN101 Refer to CST2 PCB CN82. CN102 Pin No. Signal Name Destination Signal Waveform Function CN102-1 n3MP1 Main Motor Motor Drive Signal 1 +24V CN102-2 +24VM Main Motor +24 VDC Power Supply +24V CN102-3 n3MP0 Main Motor Motor Drive Signal 0 +24V CN102-4 n3MP3...
  • Page 100 Panasonic UF-885 / 895 CN104 Pin No. Signal Name Destination Signal Waveform Function CN104-1 nPCHK2 No Paper Sensor No paper Detection Signal CN131-1 +5V (H) No Paper 0V (L) CN104-2 GND No Paper Sensor Ground CN131-2 CN104-3 LDSP3 No Paper Sensor...
  • Page 101 Maintenance, Adjustments and Checkpoints CN106 Pin No. Signal Name Destination Signal Waveform Function CN106-1 nSIZE31 SSN PCB CN101-1 +5V (H) nSIZE31 0V (L) nSIZE32 CN106-2 GND SSN PCB CN101-2 CN106-3 NC CN106-4 nSIZE32 SSN PCB CN101-4 +5V (H) 0V (L) CN106-5 GND SSN PCB CN101-5 CN106-6 NC...

  • Page 102: Troubleshooting

    Panasonic UF-885 / 895 4 Troubleshooting Initial Troubleshooting Flowchart START Plug the Power Cord in and turn the Power Switch ON. Does the unit power up normally? Does the LCD display function correctly? Troubleshoot Improper LCD Display (Sect. 4.2). Troubleshoot any 3-digit INFO.

  • Page 103: Improper Lcd Display

    Troubleshooting Improper LCD Display START Check connectors: CN11 (FCB PCB) and CN40 (PNL1 PCB). Was Firmware Update interrupted before completion? Follow the instruction on how to recover from Firmware Update failure. (Sect.5.9.3) Does CN11, pin3, on the FCB PCB measure +5VDC? Replace the FCB PCB.

  • Page 104: Information Codes (Info. Codes)

    Panasonic UF-885 / 895 Information Codes (INFO. CODES) The 3-digit information codes display to show the unit’s status. These codes also print on the journal. The following table indicates appropriate sections for troubleshooting. Code Explanation Phase Section 001-003 Recording paper jam 4.3.8...
  • Page 105 Troubleshooting 4.3.1 Information Codes: 400, 420 START START Enable the monitor speaker. Is reception from a reference (Refer to Sect. 5.2 Parameter unit successful? No. 008) Check the line connection from the wall jack to the "Line" on the LCU PCB. Perform a transmission test to the remote unit in question.
  • Page 106 Panasonic UF-885 / 895 4.3.2 Information Codes: 401, 402, 422 402, 422 START Is communication with the reference unit successful? Replace the FCB PCB. Check the remote unit in question. (Remote unit is defective) START Is the ID Number programmed into your machine? Program the ID Number.
  • Page 107 Troubleshooting 4.3.3 Information Codes: 404, 405, 407 START Is communication with reference unit successful? 1. Replace the LCU PCB. 2. Replace the FCB PCB. Change Function Parameter #010: Reduce Tx Attenuation Level Does the problem still occur? Does the problem still occur? Check the telephone line condition.
  • Page 108 Panasonic UF-885 / 895 4.3.4 Information Code: 416 START Is communication with the reference unit successful? 1. Replace the LCU PCB. 2. Replace the FCB PCB. Change Function Parameter #011: Reduce Rx Sensitivity Level Does the problem still occur? Does the problem still occur? Check the telephone line condition.
  • Page 109 Troubleshooting 4.3.5 Information Codes: 408, 409, 417, 418, 490 START Is communication with the reference unit successful? 1. Replace the LCU PCB. 2. Replace the FCB PCB. Transmitting Is the unit transmitting or receiving? Receiving Does the problem still occur? Change Function Parameter #071: Change Function Parameter #010: Increase Error Tolerance...
  • Page 110 Panasonic UF-885 / 895 4.3.6 Information Code: 434 START Is communication with the reference unit successful? Replace the FCB PCB. Does the trouble occur regardless of the remote unit? Can the transmitter in question Check the remote unit in question.
  • Page 111 Troubleshooting 4.3.7 Information Codes: 459, 494, 495 START Check the line connection between the telephone jack on the wall and the LCU PCB. Is communication with the reference unit successful? 1. Replace the LCU PCB. 2. Replace the FCB PCB. Does the problem still occur? Check the telephone line condition.
  • Page 112 Panasonic UF-885 / 895 4.3.8 Information Codes: 001, 002, 003, 007,008 (Recording Paper Jam) START Is the recording paper size and thickness within specification? Replace with correct paper. Is the recording paper loaded in the Cassete properly? Load the paper correctly.
  • Page 113 Troubleshooting 4.3.9 Information Code: 010 (No Recording Paper) START Is the Paper Cassette seated properly? Reseat the cassette. Is the recording paper loaded in the cassette? Load the paper. Is the No Paper Actuator operational? Replace the Actuator. Is the No Paper Sensor operational? Replace the No Paper Sensor.
  • Page 114 Panasonic UF-885 / 895 4.3.10 Information Codes: 030, 031 (Document Jam) START Is the document path blocked? Remove the blockage. Does the Tx Motor rotate? 1. Replace the Tx Motor. 2. Replace the FCB PCB. Does the document feed into the unit? Check all gears and rollers.
  • Page 115 Troubleshooting 4.3.11 Information Code: 630 (Dialing Error) START Is there a dial tone when MONITOR button is pressed? 1. Connect the telephone line correctly. 2. Check the telephone line. Is the remote machine busy? Can the unit dial the reference unit? 1.
  • Page 116 Panasonic UF-885 / 895 4.3.12 Information Codes: 403, 411, 414, 415 (Polling Operator Trouble) 403,411,414 START START Inform the remote side (receiving Review the polling operation side) that their machine does not referring to the User's Guide. have polling transmission capability.

  • Page 117: Printed Copy Quality Problems

    Troubleshooting Printed Copy Quality Problems 4.4.1 Black Copy START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the Toner Cartridge operational? Replace the Toner Cartridge. Is the HVPS normal? 1. Check all connectors and voltages on the HVPS. 2.

  • Page 118: Blank Copy

    Panasonic UF-885 / 895 4.4.2 Blank Copy START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains on the BTR? 1. Clean the BTR with a soft, dry cloth.

  • Page 119: Vertical White Lines

    Troubleshooting 4.4.3 Vertical White Lines START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains blocking the Laser Beam path? 1.

  • Page 120: Ghost Images

    Panasonic UF-885 / 895 4.4.4 Ghost Images A A A START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the paper. Is the Toner Cartridge operational? Replace the Toner Cartridge.

  • Page 121: Vertical Dark Lines

    Troubleshooting 4.4.5 Vertical Dark Lines START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains on the BTR? 1. Clean the BTR with a soft, dry cloth.

  • Page 122: Horizontal Dark Lines

    Panasonic UF-885 / 895 4.4.6 Horizontal Dark Lines START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains on the BTR? 1.

  • Page 123: Dark Background

    Troubleshooting 4.4.7 Dark Background START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Is the LSU normal? Replace the LSU. Is the HVPS normal? 1.

  • Page 124: Light Print

    Panasonic UF-885 / 895 4.4.8 Light Print START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or...

  • Page 125: Horizontal White Lines

    Troubleshooting 4.4.9 Horizontal White Lines START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains on the BTR? 1.
  • Page 126 Panasonic UF-885 / 895 4.4.10 Improper Fusing (Printed image does not bond to the paper) START Is the recording paper damp? Replace the paper. Is the Fuser Unit normal? Replace the Fuser Unit. (See Note) Note: Replace the entire Fuser Unit when the Thermostat and / or the Thermistor becomes open-circuit.

  • Page 127: Voids In Solid Areas

    Troubleshooting 4.4.11 Voids in Solid Areas START Is the recording paper damp? Replace the recording paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are the Fuser and Pressure Roller surfaces clean? Clean or replace the rollers.

  • Page 128: Black Dots

    Panasonic UF-885 / 895 4.4.12 Black Dots START Is the Toner Cartridge operational? Replace the Toner Cartridge. Are the Fuser and Pressure Roller surfaces clean? Clean or replace the rollers.

  • Page 129: Recording Paper Creases

    Troubleshooting 4.4.13 Recording Paper Creases START Is the recording paper damp? Replace the recording paper. Are there any foreign particles or stains in the paper path? Remove any obstructions and clean the paper path. Is the recording paper skewing? Ensure the paper is set under the corner clips in the cassette.

  • Page 130: Poor Printed Copy Quality

    Panasonic UF-885 / 895 4.4.14 Poor Printed Copy Quality START Is the printout in Service Mode 3 normal? 1. Replace the LPC PCB. 2. Replace the LSU. 3. Replace the HVPS. 4. Replace the Toner Cartridge. Make a local copy.

  • Page 131: Abnormal Printing

    Is the recording paper size and thickness within specification? Replace with correct paper (Sect. 1.5.). Is the Panasonic Toner Cartridge being used? Replace with the Panasonic Toner Cartridge. Are all switches and sensors operating properly? Adjust, clean or replace. Are there any foreign particles or...

  • Page 132: Scanned Copy Quality Problems

    Panasonic UF-885 / 895 4.4.16 Scanned Copy Quality Problems START Is the LED Array abnormal? Replace the LED Array. Are there any foreign particles or paper pieces in the scanning area? Remove the foreign particles or paper pieces from the scanning area.

  • Page 133: Document Feeder (Adf)

    Troubleshooting Document Feeder (ADF) 4.5.1 No Document Feed START Is the document set properly? Set the document properly. Is the document thickness or size within specification? Make a copy or cut the document to the specification size. Is the pip tone generated when the document is set? Does the ADF Sensor actuator move smoothly?

  • Page 134: Document Does Not Feed Or Multiple Feeds

    Panasonic UF-885 / 895 4.5.2 Document does not feed or Multiple feeds START Is the ADF Door locked? Close the ADF Door firmly. Is the adjustment of the Separation Rubber normal? Is the Separation Rubber worn out? Clean or adjust the Separation Rubber Pressure (Sect.
  • Page 135 Troubleshooting 4.5.3 Document Jam (030) or Skewing START Is the ADF Door closed? Close the ADF Door firmly. Do all sensors on the SNS PCB operate normally? Clean or replace the SNS PCB. Does the Feed Roller have drive and sufficient friction? Clean the surface of the roller with isopropyl alcohol (Sect.

  • Page 136: Communications

    Panasonic UF-885 / 895 Communications This section explains general troubleshooting procedures for the 400 series of Information Codes. These errors are primarily caused by poor telephone line quality (loss, noise, echo, etc.). This unit is furnished with Service Mode 1 to assist in troubleshooting line quality problems.

  • Page 137: Poor Transmitted Copy Quality

    Troubleshooting 4.6.2 Poor Transmitted Copy Quality START Make a copy. Is the printed copy normal? Is the LED Array lit? Does CN 9, pins 1 and 2, of the FCB PCB measure +24 VDC? (Pin 2 is for UF-895 only.) Replace the LVPS (POW).

  • Page 138: Dialing Problems

    Panasonic UF-885 / 895 4.6.3 Dialing Problems START Does the unit proceed to Phase B? 1. Set documents on the ADF correctly. 2. Check the telephone line connection. 3. The called party is busy. 4. Refer to Sect. 4.6. Are you using One-Touch dialing or ABBR.

  • Page 139: Transmission Problems

    Troubleshooting 4.6.4 Transmission Problems START Does the ID display? 1. No ID function at the remote unit. 2. The ID is not set for the remote unit. Does the Verification Stamp operate? 1. Set "STAMP=ON" 2. Check CN8 (FCB PCB). 3.

  • Page 140: Reception Problems

    Panasonic UF-885 / 895 4.6.5 Reception Problems START Does the machine answer the Ringing signal? 1. Set "RCV = AUTO". 2. Check that all covers are closed firmly. 3. Check the telephone line connection. 4. Check the Ringer Timing or DRD setting.

  • Page 141: Polling Problems

    Troubleshooting 4.6.6 Polling Problems START Is Polling reception OK? 1. Set the same polling password as the other party is using. 2. Check the password of the remote unit. Is Polling transmission OK? 1. Set the polling password or no - check mode.* 2.

  • Page 142: Information Code Table

    Panasonic UF-885 / 895 Information Code Table Information Codes Code Mode Phase Description of Problem Cause C, D Leading edge of the recording paper fails to Recording paper jam. COPY reach the Timing Sensor. (1st cassette) Timing Sensor abnormal. C, D Leading edge of the recording paper fails to Recording paper jam.
  • Page 143 Troubleshooting Information Codes Code Mode Phase Description of Problem Cause T1 timer (35±5 sec) elapsed without detecting Wrong number is dialed and the START button 300 bps signal. is pushed. Telephone line is disconnected while dialing. FCB PCB (Modem) or LCU PCB is defective.
  • Page 144 Panasonic UF-885 / 895 Information Codes Code Mode Phase Description of Problem Cause T1 timer (35 sec.) elapsed without detecting 300 There is wrong incoming call.(non-facsimile bps signal. communication) Transmitter is defective. FCB PCB or LCU PCB is defective. Busy Tone is detected after sending NSF Signal. Remote station disconnectes the line.
  • Page 145 Troubleshooting Information Codes Code Mode Phase Description of Problem Cause No document was in the ADF. (Built-in dialer Operator removed the document from the ADF engaged) after dialing was completed. Document is not set properly in the ADF. XMT or Redial count over.

  • Page 146: Diagnostic Codes

    Panasonic UF-885 / 895 Diagnostic Codes The 13-digit Diagnostic Code is provided for the service engineer to analyze how the communication was performed. The code is recorded on the Journal. Journal Example ************* -JOURNAL- ************************* DATE JAN-12-1999 ***** TIME 09:39******** NO.
  • Page 147 Troubleshooting 3rd Digit -: Not used/defined Data Definition Resolution (dpi) Paper Width S-Fine 400 x 400 300 x 300 S-Fine 400 x 400 300 x 300 S-Fine 400 x 400 300 x 300 4th Digit -: Not used/defined Data Definition Scanning Rate Resolution 20 ms/line...
  • Page 148 Panasonic UF-885 / 895 6th Digit -: Not used/defined Data Definition Polling XMT/RCV Selective Comm. Password Comm. 7th Digit -: Not used/defined Data Definition Sub-address Comm. Confidential Comm. Relayed Comm. Turnaround Polling 8th Digit -: Not used/defined Data Definition Advanced Comm.
  • Page 149 Troubleshooting 9th Digit -: Not used/defined Data Definition Short Protocol Standard/ Non-Standard Standard Standard Standard Standard Standard Standard Standard Standard Non-Standard Non-Standard Non-Standard Non-Standard Non-Standard Non-Standard Non-Standard Non-Standard 10th Digit -: Not used/defined Data Definition Coding JBIG JBIG...
  • Page 150 Panasonic UF-885 / 895 11th Digit -: Not used/defined Data Definition Symbol Rate (V.34) V.34 2400 sr 2800 sr 3000 sr 3200 sr 3429 sr 12th Digit -: Not used/defined Data Definition Modem Speed Modem Speed (V.34) 2400 bps 4800 bps...
  • Page 151 Troubleshooting 13th Digit -: Not used/defined Data Definition...

  • Page 152: Service Modes

    Panasonic UF-885 / 895 5 Service Modes Service Mode Table The following service modes are provided to assist you in setting operational functions of the unit and determining the condition of the unit. Service Mode Description Function Parameter Setting Allows changes to the function parameters (the home position, etc...).

  • Page 153: Service Mode 1 (Function Parameter Setting)

    Service Modes Service Mode 1 (Function Parameter Setting) Use the following procedure to change the function parameters. Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION” and then “7”. SET MODE (1-6) ENTER NO. OR Press “MONITOR” four times, then press “*”. SERVICE MODE ENTER NO.
  • Page 154 Panasonic UF-885 / 895 Function Parameter Table Parameter (see Note 3) Selections Function MON/TEL DIAL 1 = Monitor Selects whether the machine starts to TX 2 = TEL/DIAL automatically during On-Hook dialing. (Monitor: Start to TX after pressing START) (TEL/DIAL: Start to TX automatically)
  • Page 155 Service Modes Function Parameter Table Parameter (see Note 3) Selections Function RX START 1 = 2400 bps Selects the reception modem start speed, 14400/ 2 = 4800 bps 12000/TC9600/TC7200/9600/7200/4800/2400 bps. 3 = 7200 bps Note: 4 = 9600 bps This parameter is applicable only when 5 = TC7200 bps communicating with regular G3 machines.
  • Page 156 Panasonic UF-885 / 895 Function Parameter Table Parameter (see Note 3) Selections Function REDIAL COUNT 0 = no redial Selects the redial count from 0 to 15 times in 1 step intervals. 15 = 15 times RING DETECT COUNT 1 = 1 ring Selects the ring detection count from 1 to 9 rings in 1 ring step intervals.
  • Page 157 Service Modes Function Parameter Table Parameter (see Note 3) Selections Function MH/MR/MMR/JBIG 1 = MH (MH only) Selects the coding scheme. 2 = MR (MH or MR) 3 = MMR (MH or MR or MMR) 4 = JBIG Not used RX JAM LENGTH 1 = Off (unlimited) Selects the maximum length of a received...

  • Page 158: (Printout Of Lists, Reports And Test Results)

    Panasonic UF-885 / 895 Service Mode 3 (Printout of Lists, Reports and Test Results) From this Service Mode you can print the Function Parameter List, Page Memory Test, Printer Report, All Document File, Protocol Trace and the Toner Order Form.
  • Page 159 98 ---------- 49 --------- 99 ---------- Note:The power must be reset for the new parameter settings to take effect. -PANASONIC ******************************** -PANAFAX- UF-885 - ******* -12345678901234567890- *********** Note: 1. [ ] - Factory Default 2. The contents of the Funcion Parameter List may vary depending on the country’s regulations.
  • Page 160 Panasonic UF-885 / 895 5.3.2 Page Memory Test A test pattern prints out for checking the page memory (IC120 and IC121 on the FCB PCB) and printer mechanism using the following procedure. Step Operation or Unit Condition LCD Display Standby...
  • Page 161 FAX ROM VERSION : UF-895 ALV02100AU LBP ROM VERSION : 130002 TRANSMIT COUNTER : 000475 RECEIVE COUNTER : 000398 COPY COUNTER : 001083 PRINT COUNTER : 001128 PRINT ERROR 1.JAN-11-1999 15:38 NO.001-12 2.JAN-10-1999 10:48 NO.001-11 3.JAN-09-1999 15:23 NO.004-36 -PANASONIC **************************-PANAFAX -***************-12345678901234567890-*************...
  • Page 162 Panasonic UF-885 / 895 1. Printer Error Code Table Error Description of Problems Cause Code No problem detected The Timing Sensor turned OFF before a certain period of 1. Recording Paper Jam. time. 2. Timing Sensor defective 3. Incorrect paper size setting.
  • Page 163 Service Modes Note: If an 021 series Error Code occurs, 021-25 (Thermistor Open) or 021-26 (Thermistor detected temperarure over 200 °C), a pre-programmed recovery safety software is activated to protect the unit and the service personnel during abnormal increase in temperature.
  • Page 164 Panasonic UF-885 / 895 2. Printer Error Detail Explanation Recording Paper Jam Detection 200ms Feed Solenoid (pADF1) Timing Sensor (nRSENA) 1.8s Timing Sensor did not turn ON E11 will be logged when nRSENA does not go low 1.3s between 1.3 sec to 3.7 sec 3.7s...
  • Page 165 Service Modes Fuser Error Detection ( C) E26 will be logged. (Thermal Fuse will open.) E24 will be logged if Thermistor detects 210 C for more than 3 sec. (Thermostat will open.) E23 will be logged if Thermistor detects 197 C or higher for 5 min. after Fuser Lamp is turned Off.
  • Page 166 Panasonic UF-885 / 895 LSU Error Detection nPRNT Print Start nPMON (CN51.9) Polygon Motor ON nPMRY (CN51.8) Normal Condition Polygon Motor Ready Motor ON 3 sec 20 sec nPMRY Polygon Motor does not reach constant speed during wake up state.
  • Page 167 Service Modes Out of Toner Detection Toner Sensor Output Signal Status A (Enough toner in the cartridge) Max. - min. voltage is less than 1.0V Min. voltage is more than 1.4V Status B (Remaining toner is getting low) Max. - min. voltage is less than 0.25V Min.
  • Page 168 Panasonic UF-885 / 895 5.3.4 All Document Files Print the document files from the Flash Memory. (This function will be available as a running change in the future) Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION” and then “7”.
  • Page 169 : TSI 2B 20 20 20 38 37 2B 2B 2B 2B 39 38 36 36 35 34 37 38 38 30 DCS 00 C6 F8 44 COMMAND LOG. REMOTE : NSF LOCAL PPS-EOP ------------------------------------------------------------------ REMOTE : MCF LOCAL -PANASONIC ***************************-PANAFAX -***************-12345678901234567890-*****************...
  • Page 170 Panasonic UF-885 / 895 5.3.6 Toner Cartridge Order Form The Toner Cartridge Order Form can be printed out manually by the following procedure. Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION” and then “7”. SET MODE (1-6) ENTER NO.
  • Page 171 Service Modes ************************************* > TONER CARTRIDGE ORDER FORM < ************************************* **** The toner supply in your facsimile machine is running low **** (1) To order a replacement Cartridge from your Authorized Dealer Panafax Corp. (2) 1 201 111 5555 (3) by Phone: by Fax: 1 201 111 4444 (4)

  • Page 172: Service Mode 4 (Modem Test)

    Panasonic UF-885 / 895 Service Mode 4 (Modem Test) 5.4.1 Binary Signal This test mode is used to check the binary signal output. Signals can be output to the line using the following procedure. Step Operation or Unit Condition LCD Display...
  • Page 173 Service Modes 5.4.2 Tonal Signal This test mode is used to check the tonal signal output. Signals can be output to the line using the following procedure. Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION” and then “7”. SET MODE (1-6) ENTER NO.
  • Page 174 Panasonic UF-885 / 895 5.4.3 DTMF Signal This test mode is used to check the DTMF (Dual Tone Multi Frequency) signal output. The DTMF signal can be generated using the following procedure. Step Operation or Unit Condition LCD Display Standby...
  • Page 175 Service Modes DTMF Single Tone Table Number DTMF Signal Tones 697 Hz 770 Hz 852 Hz 941 Hz 1209 Hz 1336 Hz 1477 Hz 1633 Hz DTMF Dual Tone Table Number DTMF Dual Tones 941 Hz + 1336 Hz 697 Hz + 1209 Hz 697 Hz + 1336 Hz 697 Hz + 1477 Hz 770 Hz + 1209 Hz...
  • Page 176 Panasonic UF-885 / 895 5.4.4 Binary Signal (V.34) This test mode is used to check the binary signal output. Signals can be output to the line using the folowing procedure. (V.34) Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION”...

  • Page 177: Service Mode 5 (Diagnostic)

    Service Modes Service Mode 5 (Diagnostic) 5.5.1 CCD Test This test is used to check the CCD. Use the following procedure to initiate the test. Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION” and then “7”. SET MODE (1-6) ENTER NO.
  • Page 178 Panasonic UF-885 / 895 5.5.2 LCD / LED Test This test is used to check the LCD and LEDs. Use the following procedure to initiate the test. Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION” and then “7”.

  • Page 179: Service Mode 6 (Ram Initialization)

    Service Modes Service Mode 6 (RAM Initialization) Initializes RAM and restores the Function Parameters to their default values. Note: This operation should be performed when the unit is first installed. Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION”...

  • Page 180: Service Mode 7 (Lbp Service Mode)

    Panasonic UF-885 / 895 Service Mode 7 (LBP Service Mode) This test mode is used to change printer parameters and verify printer information. Use the following procedure to change printer parameter. Step Operation or Unit Condition LCD Display Standby JAN-12-1999 15:00 Press “FUNCTION”...

  • Page 181: Service Mode 8 (Check & Call)

    Service Modes Service Mode 8 (Check & Call) 5.8.1 Overview This feature enables the Authorized Servicing Dealers to manage and improve the Fax machine maintenance to their customers by alerting them of equipment problems. It also can be used as a Supply Sales Tool by alerting the Dealer that the unit is running Low on Toner.

  • Page 182: Setting Operation

    Panasonic UF-885 / 895 5.8.3 Setting Operation 8:CHECK & CALL PRESS SET TO SELECT SET or START SET or START CHECK & CALL (1-7) SERVICE ALERT FAX # CLEAR CLEAR 1:SVC. ALERT FAX # SET or START Enter a destination fax number for the Service Alert Report.
  • Page 183 Service Modes Note 1. Service Alert Report To enable the automatic transmission of Service Alert Report, enter the destination fax telephone number in the “SERVICE ALERT FAX #" field. When a printer error occurs, the Service Alert Report is transmitted to the designated number automatically.

  • Page 184: Service Alert Report Format

    Panasonic UF-885 / 895 5.8.4 SERVICE ALERT REPORT FORMAT *************************************************** DATE JAN-12-1999 ***** TIME 12:14 ******** **************************** > SERVICE ALERT REPORT < **************************** (2) (3) LAST PRINT ERROR : 01-06-99 12:10 No.999-00 CUSTOMER ID ABC COMPANY (4) FAX ROM VERSION...

  • Page 185: Maintenance Alert Report Format

    TRANSMIT COUNTER : 999999 (7) RECEIVE COUNTER : 999999 COPY COUNTER : 999999 PRINT COUNTER : 999999 -LOGO PANASONIC ************************************ -CHARACTER ID - ***** -31415926535897932384-*********** Explanation of Contents (1) Low Toner Message (Fixed) “MACHINE IS RUNNING OUT TONER” (4) Customer ID...

  • Page 186: Service Mode 9 (System Maintenance)

    Panasonic UF-885 / 895 Service Mode 9 (System Maintenance) 5.9.1 Overview This Service Mode is used to maintain and/or update the firmware of the machine. Use the following procedure for System Maintenance. Step Operation or Unit Condition LCD Display Standby...
  • Page 187 Service Modes 5.9.2 Operation 9:SYSTEM MAINTENANCE PRESS SET TO SELECT SYSTEM MAINT.(1-8) UF-XXXAAV12300AU FIRMWARE UPDATE 1:FIRMWARE UPDATE PRESS SET TO START * IN PROGRESS * SYSTEM MAINT.(1-8) UF-XXXAAV12300AU FIRMWARE BACKUP 2:FIRMWARE BACKUP PRESS SET TO START * IN PROGRESS * FIRMWARE BACKUP * COMPLETED * SYSTEM MAINT.(1-8)
  • Page 188 Panasonic UF-885 / 895 5.9.3 Recovering From Firmware Update Failure If the Firmware Update is interrupted before completion, the machine will not be able to progress into the Standby Mode and the LCD display will remain Blank. If this happens, please follow the steps described below to recover from a failed firmware update.
  • Page 189 Service Modes (9) Turn the Power Switch "OFF". (10) Remove the Flash Memory Card. (11) (11) Re-install the Memory Card Cover. (12) 1 Screw (B1). (13) Close the Control Panel Unit. (14) Turn the Power Switch "ON". (10) (15) Perform Parameter Initialization.
  • Page 190 Panasonic UF-885 / 895 5.9.4 Send Received File This function is the relief mode which makes it possible to retrieve memory received documents during a fatal printer error by transferring the documents to another fax machine. JAN-12-1999 15:00 FUNC MON X 4 SERVICE MODE ENTER NO.

  • Page 191: System Description

    Panasonic UF-885 / 895 6 System Description Mechanical Operation The mechanical units are installed in a single unit body. The mechanical block consists of the following mechanisms: Transmit Mechanism Receive Mechanism Covers and Enclosures Control Panel 6.1.1 Transmit Mechanism The Transmit Mechanism consists of components which feed, scan and eject documents, as well as send signals. These...
  • Page 192 System Description ADF Mechanism The ADF (Automatic Document Feeder) automatically feeds paper into the unit, and consists of the Pre-Feed Roller, ADF Roller and Separation Rubber. Each document is placed face-down on the Paper Guide Cover before being fed into the unit. •...
  • Page 193 Panasonic UF-885 / 895 Drive System The Drive System uses a Planetary Gear System to provide drive to the Pre-Feed Roller and ADF Roller. A planetary gear system does not have a fixed position; it shifts its position according to the rotational torque of the gear, together with the rotation of the planet gear.

  • Page 194: Receive Mechanism

    System Description 6.1.2 Receive Mechanism The Receive Mechanism consists of the Laser Unit (LSU), OPC (Organic Photo Conductor) Drum, and various other parts which ensure the normal feeding of recording paper. These components and their functions are as follows: Paper Feed Units No.1 and 2 Paper Feeder Unit No.2 is optional.
  • Page 195 Panasonic UF-885 / 895 Paper Feed Unit No. 1 Operation 1. The printing operation begins when the nPRT (Print Request) output signal level goes Low. The Printer Motor (650) is initialized. 2. The Paper Feed Solenoid (608) is energized for a specified period of time and turned ON. This activates the Paper Feed Roller (746), which rotates one revolution.

  • Page 196: Printing Process Operation

    System Description 6.1.3 Printing Process Operation Charge In the dark, the Bias Charge Roller (BCR) applies a high, uniform negative charge to the surface of the OPC Drum. The surface potential is approximately -650 VDC and remains because the drum has a high electric resistance in the dark. Exposure A portion of the laser beam is deflected to the timing sensor [Beam Detection (BD) Sensor], which controls the start timing of scanning on the OPC Drum.
  • Page 197 Panasonic UF-885 / 895 Cleaning After transfer, some toner may remain on the surface of the OPC Drum. A Cleaning Blade scrapes the OPC Drum surface, and the removed toner is moved into the Toner Waste Box, inside the Toner Cartridge.
  • Page 198 System Description Beam Detection (BD) Lens and Beam Detection (BD) Sensor The BD Lens receives the reflected light from the Polygon Mirror and redirects it into the BD Sensor, which converts the laser beam into electrical signals and sets the start timing for the scanning line. f-θ...

  • Page 199: Covers And Enclosures

    Panasonic UF-885 / 895 Paper Exit Sensor (610) This sensor detects the presence of printed paper at the exit. If no paper passes, or if paper is over the sensor too long, a “RECORDING PAPER JAM” message is displayed. When paper passes over the sensor, the output is Low (Low Active).

  • Page 200: Electrical Circuit Explanation

    Flash PNL PCB Memory Memory Card FCB PCB Card (214) 7.16MHz(X) (522) SRAM SRAM LCD Unit SRAM DRAM FROM 32KB (215) × 2/4/8MB 32kB 1/2/4/8MB (SH7041) × (70nS) (40nS) UF-895 for UF-885 CCD PCB (342) 3/5V Converter Program FRIP5 Page Memory TCD1208P-1 (UF-885) FROM...

  • Page 201: Signal Routing

    Panasonic UF-885 / 895 6.2.2 Signal Routing Single Copy Program ROM System SH7041 Bus(3v) (CPU) FROM(2MB) Line Memory (IC10) (IC42) SRAM(64kB) Doc.Memory/Back-up Data (IC131,132) FROM(2MB) FRIP5 (IC43) (IC160) CODEC-1 Page Memory Work Memory MN86064 DRAM(4MB) DRAM(2MB) (IC130) (IC120,121) (IC30) Image Bus...
  • Page 202 System Description File Print From Memory Program ROM System SH7041 Bus(3v) (CPU) FROM(2MB) Line Memory (IC10) (IC42) SRAM(64kB) Doc.Memory/Back-up Data (IC131,132) FROM(2MB) FRIP5 (IC43) (IC160) CODEC-1 Page Memory Work Memory DRAM(4MB) MN86064 DRAM(2MB) (IC120,121) (IC130) Smoothing ROM (IC30) (IC140) Image Bus MASK ROM 128kB(x8) (IC20)

  • Page 203: Memory Transmission

    Panasonic UF-885 / 895 Memory Transmission Program ROM System SH7041 Bus(3v) (CPU) FROM(2MB) Line Memory (IC10) (IC42) SRAM(64kB) Doc.Memory/Back-up Data (IC131,132) FROM(2MB) FRIP5 (IC43) (IC160) CODEC-1 Page Memory Work Memory DRAM(4MB) MN86064 (IC120,121) (IC130) DRAM(2MB) Smoothing ROM (IC30) (IC140) Image Bus...

  • Page 204: Memory Reception

    System Description Quick-Scanning Transmission Program ROM System SH7041 Bus(3v) (CPU) FROM(2MB) Line Memory (IC10) (IC42) SRAM(64kB) Doc.Memory/Back-up Data (IC131,132) FROM(2MB) FRIP5 (IC43) (IC160) CODEC-1 Page Memory Work Memory DRAM(4MB) MN86064 (IC120,121) (IC130) DRAM(2MB) Smoothing ROM (IC30) (IC140) Image Bus MASK ROM 128kB(x8) (IC20) (IC141)
  • Page 205 Panasonic UF-885 / 895 Direct Reception Program ROM System SH7041 Bus(3v) (CPU) FROM(2MB) Line Memory (IC10) (IC42) SRAM(64kB) Doc.Memory/Back-up Data (IC131,132) FROM(2MB) FRIP5 (IC43) (IC160) CODEC-1 Page Memory Work Memory MN86064 DRAM(4MB) (IC130) (IC120,121) DRAM(2MB) Smoothing ROM (IC30) (IC140) Image Bus...

  • Page 206: Picture Signal Scanning Block

    System Description 6.2.3 Picture Signal Scanning Block The image data read by the optical unit is input to the CCD mounted on the CCD PC Board, then transferred to the FCB PC Board after the optical information is converted into an electrical signal by the CCD. The following shows a block diagram of the picture signal scanning circuit.
  • Page 207 Panasonic UF-885 / 895 3.0V ABC Circuit Output CCD Output VOUT1 IC180 IC180 IC160 M86075 IC112 R673 Control Circuit C650 R674 Shading Correction Circuit The Shading Correction Circuit, included in IC160, is provided to correct for reduction in LED lamp intensity around the optical lens and LED lamp intensity distortion due to shading of each bit.

  • Page 208: Ccd Drive Clock Generator Circuit

    System Description 6.2.4 CCD Drive Clock Generator Circuit This circuit is also contained in IC9. Its function is to generate FSG, FCK1 and FR clock signals, which are required for driving the CCD. These clock signals are generated by the system clock generator circuit derived from the 25.0 MHz clock signal that is input to IC160.

  • Page 209: Picture Quality Control Circuit

    Panasonic UF-885 / 895 6.2.5 Picture Quality Control Circuit This circuit consists of a recording picture control standard cell IC140 (DZZAC000168 or “1PC”), an interpolation table ROM (IC141) and its peripheral circuitry.The recording picture control standard cell (IC140) inputs the serial data from the IC110 (DZZAC000167or “PEC”), conducts picture quality correction (smoothing), reduction, synchronization control, etc., then sends this...

  • Page 210: Line Monitor Circuit

    System Description 6.2.6 Line Monitor Circuit The Line Monitor Circuit consists of an operational amplifier (IC100), analog master (IC91) and its peripheral circuits. Its function is to monitor the dial tone, DTMF tone, response signals, etc. over the speaker. It also sounds the output of the key touch tones, alarm tones, etc.

  • Page 211: Transmit Motor Control Circuit

    Panasonic UF-885 / 895 6.2.7 Transmit Motor Control Circuit The transmit motor is a stepper motor powered by +24 VDC and driven by a 1/2-phase excitation, greater step division is provided by controlling the phase circuit in steps. The stepping signal and chopping current control signals (pTINA, pTTDA, pTINB and pTTDB) are sent to the chopper drive circuit, comprised of IC190 and its peripheral circuitry, from the IC150 (S-CPU) output port.

  • Page 212: Line Control Board

    System Description 6.2.8 Line Control Board The following shows a block diagram of the Line Control Board. Modem Line (IC 91) (IC 90) (IC 80) Port (IC 60) Ring Detector +24V Port (IC 60) Telephone Off-Hook Detector Port (IC 60) LCU PCB FCB PCB The Ring Detector consists of a photocoupler, PC2, and its peripheral circuits.
  • Page 213 Panasonic UF-885 / 895 Dial Pulse Generator The circuit consists of the CML relay, PLS relay and their peripheral circuits. This circuit generates dial pulses. The CPU on the FCB PC Board controls all dial pulse generation sequences. It turns relay CML and PLS ON and OFF through the DZZSP58025 (IC60).

  • Page 214: Sns Pc Board

    System Description 6.2.9 SNS PC Board Each sensor consists of an LED and phototransistor. When documents are placed on the ADF tray or are moving, a shutter in the document sensor closes. The light path from the LED is blocked turning the phototransistor “OFF”, and the output voltage from the sensor becomes a “High”...
  • Page 215 Panasonic UF-885 / 895 6.2.10 Control Panel The Control Panel consists of the Display PCB and Panel Unit, which display various status information. It is normally interfaced to the main CPU. Keyed input signals are received by the Panel CPU and the data is transferred to the main CPU on the FCB PC Board.

  • Page 216: Printer Motor Drive Circuit

    System Description 6.2.11 Printer Motor Drive Circuit Motor Drive Circuit The Printer Motor is a Brushless DC Motor. When the nMMP2 signal level goes Low, the Printer Motor starts rotating. When the Printer Motor reaches a constant speed, the monitor feed back signal, nMMP3 goes Low and is fed back to the CPU which controls the printing process.The Printer Motor is powered by a +24 VDC supply.
  • Page 217 Panasonic UF-885 / 895 Fuser Lamp Drive Circuit The Fuser Lamp is powered by 115 VAC. It is driven by the LVPS and controlled the FCB PC Board. When the CN32, Pin 9 (nSSR) on the LVPS goes LOW, the Fuser Lamp turns ON. This lights up the PC301 LED and activates the CR301 photo-triac, and 115 VAC is sent to the Fuser Lamp.
  • Page 218 System Description Fuser Temperature Control Circuit The fuser temperature is controlled by IC51 on the LPC PC Board, which contains A/D (Analog/Digital) converters ANI0 and ANI7. The Fuser Temperature Control Circuit uses A/D converter, ANI1. When the PC301 drive current is transmitted from the LPC PC Board to the LVPS, the Fuser Lamp turns ON.
  • Page 219 Panasonic UF-885 / 895 High Voltage Drive Circuit (Charging, Development and Transfer) High Voltage is provided through a DC to DC converter, which changes the +24 VDC supply voltage to -650 VDC, and output approximately 0.72 KVAC (Steady current: 450 µA) for the Charging Block. The Developer Circuit converts the +24 VDC to between -500 VDC for the development bias, and outputs 1,700 VAC(p-p) at a frequency of 1.7 kHz to charge the toner.

  • Page 220: Interlock Safety Circuit

    System Description 6.2.12 Interlock Safety Circuit This safety circuit turns OFF the +24 VDC supply voltages when the Printer Cover is opened. When the Printer Cover is opened, the microswitch(es) on the ILS PC Board are de-actuated, turning OFF +24 VDC to the Printer Drive Circuit, the HVPS, and the Paper Feed Solenoid Circuits, turning OFF the +5 VDC supply voltage for the Laser Driver Circuit on the Laser Unit.

  • Page 221: Lsu Control Circuit

    Panasonic UF-885 / 895 6.2.13 LSU Control Circuit The laser control signals are described below. nLDON The LSU is activated when this output signal is LOW. If an error occurs, the nLDON output signal level goes High and the LSU is deactivated.
  • Page 222 INPUT RECTIFIER CONVERTER +5 VP OUTPUT INPUT +5 VP CIRCUIT CIRCUIT CIRCUIT OUTPUT (Q101) CIRCUIT -12 VDC OUTPUT CIRCUIT -12 VDC OUTPUT CONTROL +24 VDC OUTPUT CIRCUIT +24 VDC OUTPUT CIRCUIT OVER CURRENT LIMITTER +5 VDC +5 VDC OUTPUT OUTPUT OUTPUT OUTPUT CIRCUIT...
  • Page 223 Panasonic UF-885 / 895 ETXDN218A7D (115V) Input Filter Circuit AC line voltage travels to the rectifying circuit through the line filter. The line filter eliminates RFI noise which may otherwise pass to the AC line from the power supply unit. It also protects the power supply unit from transient noise which may pass into the unit from the AC line.
  • Page 224 System Description The value of output voltage is Ton : On time of Q101 Eo=d/(1-d)*Ei Ts : Period of oscillation d=Ton/Ts Equivalent circuit model for the RCC. In the equivalent circuit ; When SW is on, current D(D201) flows (Q101) When SW is off, current flows The value of inductance increase current between on period.

  • Page 225: Exploded View & Parts List

    Panasonic UF-885 / 895 7 Exploded View & Parts List Cover Assembly AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZJE000165 Cradle, Upper DZFN000090 Cord, Cradle DZEC100422 SRU PCB Assembly DZJE000166 Cradle, Lower DZMA001399 Cover, Front...
  • Page 226 L10AB:10/11/20 1111 (OPTIONAL) 1112 1110 2 2 2 To Fig. 5 To Fig. 5 1106 Fig.1: Cover Assemblies...

  • Page 227: Control Panel Unit

    Panasonic UF-885 / 895 Control Panel Unit AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZMA001416 Cover, Panel DZNA000501 Sheet, One-Touch DZNA000495 Cover, Directory Sheet DZNA000498 Plate, LCD DZKB000145 Ten Key DZKB000146 Start Key DZKB000147 Copy Key...
  • Page 228 L10AB:10/10/22 To Fig.5 To Fig.5 Fig.2: Control Panel Unit...

  • Page 229: Transmitter Assembly

    Panasonic UF-885 / 895 Transmitter Assembly AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZJB000109 Chassis, Transmitter DZMG000018 Latch 2G, 5J DZKN000154 Spring, Coil, Latch 2G, 5K DZHP002388 Bracket A, Motor DZHP002389 Bracket B, Motor DZJM000171...
  • Page 230 L10/PB:10/11/20 UF-885 UF-895 To Fig.5 2 2 2 To Fig.5 To Fig.5 To Fig.5 Fig.3: Transmitter Assembly...

  • Page 231: Fuser Unit

    Panasonic UF-885 / 895 Fuser Unit AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZJB000012 Cover, Fuser DZLA000083 Roller, Idle 1C, 2D DZKR000005 Spring, Pinch Roller 1C, 1D DZJC000082 Terminal C, Fuser Lamp DZGT000010 Thermistor Assembly...
  • Page 232 L10/PB:10/10/20 To Fig.5 To Fig.5 2 2 2 To Fig.5 To Fig.5 White Black Fig.4: Fuser Unit To Fig.6...

  • Page 233: Electrical Parts

    Panasonic UF-885 / 895 Electrical Parts AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZJA000140 Chassis, Power Supply PCB ETXDN218A7D PSU, Low Voltage (100V) DZJA000139 Terminal Cover, High Voltage DZKN000069 Spring, Coil DZKN000070 Spring, Coil EUKMBN659HF...
  • Page 234 L10AB:10/11/20 To Fig.3 To Fig.3 To Fig.6 To Fig.6 Q To Fig.6 To Fig.3 N To Fig.6 To Fig.6 To Fig.3 To Fig.6 To Fig.X To Fig.1 To Fig.6 Q To Fig.6 M To Fig.6 To Fig.6 To Fig.1 To Fig.6 To Fig.6 To Fig.2 BB To Fig.4...

  • Page 235: Paper Transportation

    Panasonic UF-885 / 895 Paper Transportation AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZJB000013 Main Frame DZJB000015 Base Frame DZJA000237 Cassette Rail, Left DZJB000114 Cassette Rail, Right DZJD000024 Stay, Right 500 DZJN000015 Rubber Leg DZHP000155...
  • Page 236 Exploded View & Parts List Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZFP000207 Harness 1, SNS 4E, 5C DZFP000753 Harness, Toner Sensor XTB3+8J Screw 1A, 1B, 1C, 1H, 1J, 2A, 2B, 2E, 2F, 2H, 2K, 3B, 3E, 3H, 4D, 4F, 4J, 4I, 4K, 5A, 5C, 5J, 6B, 6H, 6J, 7A, 7E, 7F, 8B, 8E, 8H XYN3+F8...
  • Page 237 L10AB:10/11/20 To fig.5 To fig.5 To fig.5 To fig.5 To fig.5 To fig.5 White For European Model To fig.5 To fig.5 To fig.5 Black To fig.5 To fig.7 or 9 To fig.5 To fig.4 Fig.6: Paper Transportation...

  • Page 238: Feeder Unit

    Panasonic UF-885 / 895 250 Feeder Unit AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZJA000184 Cassette Rail 2, Right DZJC000092 Stay 2, Rear DZJE000120 Cover, Blind DZJA000175 Bracket, Bushing, Front DZJA000174 Bracket, Bushing, Rear DZLA000087...
  • Page 239 L10/PB:10/11/20 Black White White Black To fig.9 Fig.7: 250 Feeder Unit...

  • Page 240: Paper Cassette

    Panasonic UF-885 / 895 250 Paper Cassette AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZJF000194 Base Frame, Cassette DZJF000159 Guide, Paper Width DZJF000160 Guide, Paper Length DZJM000091 Lock, Pressure Plate DZJC000079 Clip, Paper, Right DZJC000080...
  • Page 241 Fig.8: 250 Paper Casette...

  • Page 242: Feeder Unit

    Panasonic UF-885 / 895 500 Feeder Unit AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 DZJA000235 Cassette Rail, Right 500 DZJC000121 Stay, Rear 500 DZJE000120 Cover, Blind DZJA000175 Bracket, Bushing, Front DZJA000174 Bracket, Bushing, Rear DZLA000087...
  • Page 243 Black White White Black To fig.6 or 7 1018 Fig.9: 500 Feeder Unit...

  • Page 244: Paper Cassette

    Panasonic UF-885 / 895 7.10 500 Paper Cassette AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 1001 DZJF000232 Base Frame, Cassette 1002 DZJF000228 Guide, Paper Width 1004 DZJM000091 Lock, Pressure Plate 1005 DZJC000079 Clip, Paper, Right...
  • Page 245 1010 1019 1017 1018 1013 1008 1009 1004 1012 1016 1015 1005 1007 1006 1014 1002 1001 1011 Fig.10: 500 Paper Casette...

  • Page 246: 7.11 Packing

    Panasonic UF-885 / 895 7.11 Packing AU=U.S.A. AC=Canada Ref. No. Part Number Description Location UF-885 UF-895 UF-885 UF-895 1101 DZRB000357 Carton 1102 DZRH000247 Assembly, Cushion 2D, 3E, 5C, 5E 1105 DZSD000792 User’s Guide (English) DZSD000794 User’s Guide (Canadian French) DZSD000793...
  • Page 247 Exploded View & Parts List L10AB:10/12/22 1102 1102 1113 1114 1108 1107 1115 1102 1106 1102 1101 1105 1109 Fig.11: Packing and Accessories...

  • Page 248: Installation

    Installation 8 Installation Function Key Any function can be started by first pressing and then enter the function number, or by pressing FUNCTION scroll key repeatedly until the desired function appears on the display. Deferred Communication Set Mode 1 = XMT 1 = User Parameters 2 = Polling Date &...

  • Page 249: Main Unit And Accessories

    Panasonic UF-885 / 895 Main Unit and Accessories Unpack the carton and check that you have all the accessories illustrated. Machine Toner Cartridge Document Return Tray Recording Paper Tray Telephone Line Cable Power Cord Paper Size Label Lithium Battery and Holder...

  • Page 250: Installing The Accessories

    Installation Installing the Accessories Installing the Lithium Battery (This battery is used to backup the clock during power failures, see page 166 of the User's Guide.) (1) Open the ADF Door. (2) Install the Battery Holder, slide it to the Left until it latches and close the ADF Door.

  • Page 251: Installing The Toner Cartridge

    Panasonic UF-885 / 895 Installing the Toner Cartridge Unpack the Toner Cartridge and rock it back and forth as shown for 5 or 6 times to even the toner inside. Toner Cartridge Remove the protective seal. Note: Pull on the seal slowly and straight out.
  • Page 252 Installation Align the arrow and the projection on both sides as shown and insert the Toner Cartridge into the machine. Close the Printer Cover firmly. Printer Cover If you are replacing the Toner Cartridge, it is recommended to clean the Printer Roller to maintain good of the User's Guide.

  • Page 253: Loading The Recording Paper

    Panasonic UF-885 / 895 Loading the Recording Paper Paper Specifications In general, most bond papers will produce excellent results. Most photocopy papers will also work very well. There are many "name" and "generic" brands of paper available. We recommend that you test various papers until you obtain the results you are looking for.
  • Page 254 Installation (1) Release the hook and remove the Paper Size Selector. (2) Rotate the Paper Size Selector until the appropriate setting marked on the Selector is facing upward and the wording is upright. (3) Reinstall the Paper Size Selector. (1) Push the Pressure Plate until it is locked Clip down.

  • Page 255: Connecting The Telephone Line Cable And Power Cord

    Panasonic UF-885 / 895 Connecting the Telephone Line Cable and Power Cord Power Cord Plug one end of the power cord into an ordinary 3 prong AC outlet and the other end into the receptacle on the rear of the machine.
  • Page 256 Installation Power Switch After connecting all cables and Power Cord, turn the power switch ON. Note Attach the cables to the Hook to prevent recording paper jam. External Telephone (Optional) You can connect an additional standard single line telephone to the machine. To connect the telephone, break off the protective tab on the TEL jack.

  • Page 257: Customizing Your Machine

    Panasonic UF-885 / 895 Customizing Your Machine Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter Table, are preset for you and do not need to be changed. If you do want to make a change, read the table carefully.

  • Page 258: Fax Parameter Table

    Installation Fax Parameter Table Setting Parameter Setting Comments Number CONTRAST Normal Setting the home position of the CONTRAST key. Lighter Darker RESOLUTION Standard Setting the home position of the RESOLUTION key. Fine S-Fine STAMP Setting the home position of the STAMP key. To select the stamp function when document is stored in memory, see Fax Parameter No.
  • Page 259 Panasonic UF-885 / 895 Setting Parameter Setting Comments Number PRINT REDUCTION Fixed Selecting print reduction mode. Fixed: Reduce received document according to setting of Parameter No. 25. Auto Auto: Reduce received document according to the length of received documents. REDUCTION RATIO Selecting fixed print reduction ratio from 70% to 100%.
  • Page 260 Selecting whether the machine performs selective reception. (See page 113 of the User's Guide.) Valid DIAGNOSTIC Setting the password for Remote Diagnostic Mode. Please ask (----) PASSWORD your Panasonic Authorized Dealer for details. SUB-ADDRESS Setting a 20-digit password for secured sub-address (----) PASSWORD communication. FAX FORWARD...
  • Page 261 Panasonic UF-885 / 895 Setting Parameter Setting Comments Number COVER SHEET Setting the home position of the Cover Sheet parameter in the Select Mode. (See page 90 of the User’s Guide.) LANGUAGE A-English Selecting the language to be shown on the display and reports.

  • Page 262: Options And Supplies

    Panasonic UF-885 / 895 9 Options and Supplies Options and Supplies A. Options: Available Order No. Picture Description Models UF-885 UE-403160-AU Handset Kit UF-895 250 sheets Letter / Legal / A4 Size Paper UF-885 UE-409057AU Cassette with the Feeder Unit...
  • Page 263 Options and Supplies B. Supplies: Available Order No. Picture Description Models UF-885 FX-13-2B Verification Stamp UF-895 UF-885 UG-3313 Toner Cartridge UF-895...

  • Page 264: Installing Optional Feeder Unit (Ue-409057)

    Panasonic UF-885 / 895 Installing Optional Feeder Unit (UE-409057) 1. Contents Qty. Description Part No. Remarks 250 Sheets Paper Cassette with Feeder Unit Paper Size Label Set DZNK000298 2. Installation Note: Install this Feeder Unit as the 2nd Feeder Unit only.
  • Page 265 Options and Supplies (13) Place the machine upright. (14) Re-install the Document Trays, the Paper Cassettes and (13) the Toner Cartridge. (15) Re-connect the Power Cord and the Telephone Line Cable. (16) Turn the Power Switch to the ON (I) position. (17) Print some pages from the Optional Feeder Unit to confirm its operation.

  • Page 266: Installing Optional Feeder Unit (Ue-409056)

    Panasonic UF-885 / 895 Installing Optional Feeder Unit (UE-409056) 1. Contents Qty. Description Part No. Remarks 500 Sheets Paper Cassette with Feeder Unit Paper Size Label Set DZNK000298 2. Installation Note: Always install this Feeder Unit at the base of the unit. Install it as the 2nd Feeder Unit when configured for two cassettes or as the 3rd Feeder Unit when configured for three cassettes.
  • Page 267 Options and Supplies (13) Place the machine upright. (14) Re-install the Document Trays, the Paper Cassettes and (13) the Toner Cartridge. (15) Re-connect the Power Cord and the Telephone Line Cable. (16) Turn the Power Switch to the ON (I) position. (17) Print some pages from the Optional Feeder Unit to confirm its operation.

  • Page 268: Installing Handset Kit (Ue-403160)

    Panasonic UF-885 / 895 Installing Handset Kit (UE-403160) 1. Contents Qty. Description Part No. Remarks Handset DZDU000031 Handset Cord DZFN000066 Cradle Assembly DZML000132 2. Installation (1) Break off the protective tab of the HANDSET Jack. (2) Hook the projections of the Cradle Assembly into the holes on the rear of the machine.

  • Page 269: Installing Parallel Port Interface Kit (Ue-403159)

    Options and Supplies Installing Parallel Port Interface Kit (UE-403159) 1. Contents Qty. Description Part No. Remarks Parallel Port Interface Assembly DZMA001832 Ribbon Cables DZHP002970 Screw, 3x8 XTB3+8J Print/Twain Scanner Driver Diskette DZQW000112 Floppy Disk 2HD 2. Installation Note: Before starting the installation, prepare the Master Firmware Card with the appropriate Optional Firmware. (See page 48) (1) Turn the Power Switch to the OFF (O) position.
  • Page 270 Panasonic UF-885 / 895 (12) Peel off the brown adhesive protector from the protective film. (13) Secure the protective film to the top of the Parallel Port Interface Bracket as illustrated on the left. (13) (12) (14) Connect the Ribbon Cables as illustrated on the left.

  • Page 271: Installing Pdl Printer Driver Kit (Ue-403162)

    Options and Supplies Installing PDL Printer Driver Kit (UE-403162) 1. Contents Qty. Description Part No. Remarks PDL PC Board DZEC101411 PCB Spacer DZJH000059 PDL Print Driver DZQX000003 Floppy Disk 2HD 2. Installation Note: Make sure that the Parallel Port Interface Kit (Order No.: UE-403159) has been installed before installing the PDL Printer Driver Kit.
  • Page 272 Panasonic UF-885 / 895 (11) Insert the PCB Spacer into the hole on the PDL PC Board. (11) (12) Connect the PDL PC Board to the CN55 on the FCB PC Board. (14) (13) Secure the PDL PC Board by inserting the PCB Spacer into the hole on the FCB PC Board.

  • Page 273: Installing G3 Communication Port Kit (Ue-407019)

    Options and Supplies Installing G3 Communication Port Kit (UE-407019) 1. Contents Qty. Description Part No. Remarks G3 PCB Assembly DZEC101274 Screw. 3x8 XYN3+F8 Ribbon Cable DZFP000709 Screw. 3x8 DZPB000007 Silver Colored Screw 2. Installation Note: Before starting the installation, prepare the Master Firmware Card with the appropriate Optional Firmware. (See page 48) (1) Turn the Power Switch to the OFF (O) position.
  • Page 274 Panasonic UF-885 / 895 (16) Connect one end of the Ribbon Cable to CN50 on the FCB PC Board and the other to the G3 PC Board. (16) (17) Secure the G3 PCB Assembly using the 4 Screws which (17) came with the kit.
  • Page 275 Model Drawing Name FCB PC Board (1/24) UF-885 DZEP000430...
  • Page 276 Model Drawing Name FCB PC Board (2/24) UF-885 DZEP000430...
  • Page 277 Model Drawing Name FCB PC Board (3/24) UF-885 DZEP000430...
  • Page 278 Model Drawing Name FCB PC Board (4/24) UF-885 DZEP000430...
  • Page 279 Model Drawing Name FCB PC Board (5/24) UF-885 DZEP000430...
  • Page 280 Model Drawing Name FCB PC Board (6/24) UF-885 DZEP000430...
  • Page 281 Model Drawing Name FCB PC Board (7/24) UF-885 DZEP000430...
  • Page 282 Model Drawing Name FCB PC Board (8/24) UF-885 DZEP000430...
  • Page 283 Model Drawing Name FCB PC Board (9/24) UF-885 DZEP000430...
  • Page 284 Model Drawing Name FCB PC Board (10/24) UF-885 DZEP000430...
  • Page 285 Model Drawing Name FCB PC Board (11/24) UF-885 DZEP000430...
  • Page 286 Model Drawing Name FCB PC Board (12/24) UF-885 DZEP000430...
  • Page 287 Model Drawing Name FCB PC Board (13/24) UF-885 DZEP000430...
  • Page 288 Model Drawing Name FCB PC Board (14/24) UF-885 DZEP000430...
  • Page 289 Model Drawing Name FCB PC Board (15/24) UF-885 DZEP000430...
  • Page 290 Model Drawing Name FCB PC Board (16/24) UF-885 DZEP000430...
  • Page 291 Model Drawing Name FCB PC Board (17/24) UF-885 DZEP000430...
  • Page 292 Model Drawing Name FCB PC Board (18/24) UF-885 DZEP000430...
  • Page 293 Model Drawing Name FCB PC Board (19/24) UF-885 DZEP000430...
  • Page 294 Model Drawing Name FCB PC Board (20/24) UF-885 DZEP000430...
  • Page 295 Model Drawing Name FCB PC Board (21/24) UF-885 DZEP000430...
  • Page 296 Model Drawing Name FCB PC Board (22/24) UF-885 DZEP000430...
  • Page 297 Model Drawing Name FCB PC Board (23/24) UF-885 DZEP000430...
  • Page 298 Model Drawing Name FCB PC Board (24/24) UF-885 DZEP000430...
  • Page 299 Model Drawing Name FCB PC Board (1/24) UF-895 DZEP000338...
  • Page 300 Model Drawing Name FCB PC Board (2/24) UF-895 DZEP000338...
  • Page 301 Model Drawing Name FCB PC Board (3/24) UF-895 DZEP000338...
  • Page 302 Model Drawing Name FCB PC Board (4/24) UF-895 DZEP000338...
  • Page 303 Model Drawing Name FCB PC Board (5/24) UF-895 DZEP000338...
  • Page 304 Model Drawing Name FCB PC Board (6/24) UF-895 DZEP000338...
  • Page 305 Model Drawing Name FCB PC Board (7/24) UF-895 DZEP000338...
  • Page 306 Model Drawing Name FCB PC Board (8/24) UF-895 DZEP000338...
  • Page 307 Model Drawing Name FCB PC Board (9/24) UF-895 DZEP000338...
  • Page 308 Model Drawing Name FCB PC Board (10/24) UF-895 DZEP000338...
  • Page 309 Model Drawing Name FCB PC Board (11/24) UF-895 DZEP000338...
  • Page 310 Model Drawing Name FCB PC Board (12/24) UF-895 DZEP000338...
  • Page 311 Model Drawing Name FCB PC Board (13/24) UF-895 DZEP000338...
  • Page 312 Model Drawing Name FCB PC Board (14/24) UF-895 DZEP000338...
  • Page 313 Model Drawing Name FCB PC Board (15/24) UF-895 DZEP000338...
  • Page 314 Model Drawing Name FCB PC Board (16/24) UF-895 DZEP000338...
  • Page 315 Model Drawing Name FCB PC Board (17/24) UF-895 DZEP000338...
  • Page 316 Model Drawing Name FCB PC Board (18/24) UF-895 DZEP000338...
  • Page 317 Model Drawing Name FCB PC Board (19/24) UF-895 DZEP000338...
  • Page 318 Model Drawing Name FCB PC Board (20/24) UF-895 DZEP000338...
  • Page 319 Model Drawing Name FCB PC Board (21/24) UF-895 DZEP000338...
  • Page 320 Model Drawing Name FCB PC Board (22/24) UF-895 DZEP000338...
  • Page 321 Model Drawing Name FCB PC Board (23/24) UF-895 DZEP000338...
  • Page 322 Model Drawing Name FCB PC Board (24/24) UF-895 DZEP000338...
  • Page 323 Model Drawing Name LCU PC Board (1/1) UF-885/895 DZYNA1435...
  • Page 324 Model Drawing Name LCE PC Board (1/1) Except for European Models UF-885/895 DZYNA1436...
  • Page 325 Model Drawing Name LCE PC Board (1/1) For European Models UF-885/895 DZEP000441...
  • Page 326 Model Drawing Name SRU PC Board (1/1) UF-885/895 DZEP000168...
  • Page 327 Model Drawing Name PNL PC Board (1/4) UF-885/895 DZEP000340...
  • Page 328 Model Drawing Name PNL PC Board (2/4) UF-885/895 DZEP000340...
  • Page 329 Model Drawing Name PNL PC Board (3/4) UF-885/895 DZEP000340...
  • Page 330 Model Drawing Name PNL PC Board (4/4) UF-885/895 DZEP000340...
  • Page 331 Model Drawing Name CCD PC Board (1/1) UF-885 DZYC0539C...
  • Page 332 Model Drawing Name CCD PC Board (1/1) UF-895 DZYNA1428...
  • Page 333 Model Drawing Name LPC PC Board (1/4) UF-885/895 DZEP000388-0...
  • Page 334 Model Drawing Name LPC PC Board (2/4) UF-885/895 DZEP000388-0...
  • Page 335 Model Drawing Name LPC PC Board (3/4) UF-885/895 DZEP000388-0...
  • Page 336 Model Drawing Name LPC PC Board (4/4) UF-885/895 DZEP000388-0...
  • Page 337 Model Drawing Name SNS PC Board (1/1) UF-885/895 DZEP000345...
  • Page 338 Model Drawing Name ACI PC Board (1/1) UF-885/895 DZYNA1556...
  • Page 339 Model Drawing Name ILS PC Board (1/1) UF-885/895 DZYNA1555...
  • Page 340 Model Drawing Name SSN PC Board (1/1) UF-885/895 DZEP000165...
  • Page 341 Model Drawing Name CST2 PC Board (1/1) UF-885/895 DZYNA1557...
  • Page 342 Model Drawing Name CST3 PC Board (1/1) UF-885/895 DZEP000166...

This manual is also suitable for:

Panafax uf-895

Table of Contents