Table of Contents
Advertisement
Available languages
Available languages
Removing paint/varnish
•
Switch the heat gun on and let it warm up to operating temperature.
•
Keep the nozzle about 10 cm away from the paint to be removed.
•
Do not heat the same spot too much, otherwise the paint could begin to burn and will then
be even more difficult to remove.
Other applications
•
Removing stickers and decorations.
•
Defrosting frozen pipes, door locks, padlocks, etc. Do not try to defrost plastic pipes!
•
Bringing out wood grain before staining or lacquering.
•
Speeding up the drying of paint and varnish to help see what the colour is when the paint
has dried.
•
Removing old window putty before applying new.
•
Shrinking packaging shrink wrap.
•
Waxing skis.
•
Shrinking heat-shrink tubing.
Care and maintenance
•
Keep the air inlet and outlet clean.
•
Clean the product using a clean soft cloth and a little mild detergent.
Never clean the product using solvents or flammable liquids.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can be
disposed of in a responsible manner. When recycling your product, take it to your
local collection facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
Specifications
Voltage
Power
Operating temperature
Air flow
Weight
Protection class
220–240 V AC, 50 Hz
2000 W
350 / 550 °C
250 / 550 l/min
0.6 kg
II
5
Advertisement
Table of Contents
