Mitsubishi 700 Series Instruction Manual page 100

Parameter
Function Name
Life alarm status
255
display
Inrush current
256
limit circuit life
display
Control circuit
257
capacitor life
display
Main circuit
258
capacitor life
display
Main circuit
259
capacitor life
measuring
260
Refer to Pr.72.
——
Power failure stop
261
selection
267
Refer to Pr. 73.
268
Refer to Pr. 52.
——
269
Parameter for manufacturer setting. Do not set.
Magnitude of
295
frequency change
setting
Incre- Initial
Range
ments Value
Displays whether the control circuit
capacitor, main circuit capacitor, cooling
1 0 (0 to 15) fan, and each parts of the inrush current
limit circuit has reached the life alarm
output level or not. (Reading only)
Displays the deterioration degree of the
1% 100% (0 to 100%)
inrush current limit circuit. (Reading only)
Displays the deterioration degree of the
1% 100% (0 to 100%)
control circuit capacitor. (Reading only)
Displays the deterioration degree of the
main circuit capacitor. (Reading only)
1% 100% (0 to 100%)
The value measured by Pr. 259 is
displayed.
Setting "1" and switching the power supply
off starts the measurement of the main
circuit capacitor life.
1 0 0, 1 When the Pr. 259 value is "3" after
powering ON again, the measuring is
completed.
Displays the deterioration degree in Pr. 258.
Coasts to stop.
0 When undervoltage or power failure
occurs, the output is shut off.
Decelerates to a stop when undervoltage
1
or a power failure occurs.
1 0
Decelerates to a stop when undervoltage
or a power failure occurs.
2
If power is restored during a power failure,
the inverter accelerates again.
0 Invalid
0.01 0
0.01, 0.10, The setting increments when the set
1.00, 10.00 frequency is changed by the setting dial.
Parameter list
Description
×
×
×
×
× ×
× ×
× ×
× ×
3
91