Table of Contents
Advertisement
1620A "DewK" Thermo-Hygrometer
Getting Started
CAUTIONS
If the instrument is dropped, struck, or handled in a way that causes internal or external
●
physical damage, immediately unplug the AC adapter, remove the battery, discontinue
use, and contact an Authorized Service Center. Do not attempt to disassemble or repair
the instrument, battery, or AC adapter. Refer repairs or replacement components to an
Authorized Service Center.
The instrument and sensors are sensitive and can be easily damaged. Always handle these
●
devices with care. DO NOT allow them to be dropped, struck, stressed, or overheated.
Sensors are fragile devices which can be damaged by mechanical shock, overheating, and
●
exposure to fluids. Damage may not be visibly apparent but can cause drift, instability,
and loss of accuracy. Observe the following precautions:
DO NOT allow sensors to be dropped, struck, or stressed.
●
DO NOT overheat sensors beyond their recommended temperature range.
●
Keep the sensors clean and away from fluids and dust.
●
Authorized Service Centers
Please contact one of the following authorized Service Centers to coordinate service on your
Hart product:
Fluke Corporation, Hart Scientific Division
799 E. Utah Valley Drive
American Fork, UT 84003-9775
USA
Phone: +1.801.763.1600
Telefax: +1.801.763.1010
E-mail: support@hartscientific.com
Fluke Nederland B.V.
Customer Support Services
Science Park Eindhoven 5108
5692 EC Son
NETHERLANDS
Phone: +31-402-675300
Telefax: +31-402-675321
E-mail: ServiceDesk@fluke.nl
Fluke Int'l Corporation
Service Center - Instrimpex
Room 2301 Sciteck Tower
22 Jianguomenwai Dajie
Chao Yang District
Beijing 100004, PRC
CHINA
Advertisement
Table of Contents
