Feature Port; User Management; Device Settings; Maintenance - LEGRAND Raritan SRC-0100 User Manual

Menu Information shown

Feature Port

Status and settings of the device connected to the Feature port(s), which can
be one of the following.
The name
 Asset Strip
'Feature Port(s)'
 External Beeper
will be replaced
 LHX 20
with one of the
 SHX 30
device names
 LHX 40
listed to the right
See
Webcams
Webcam live snapshots/video and webcam settings.
See
SmartLock
-- and/or --
Card Readers
 SmartLock: Configures and controls the door handles connected to this
 Card Readers: Lists the card readers connected to SRC directly or
See

User Management

Data and settings of user accounts and groups, such as password change.
See

Device Settings

Device-related settings, including network, security, system time, event
rules and more.
See

Maintenance

Device information and maintenance commands, such as firmware upgrade,
device backup and reset.
See
Feature Port
(on page 137).
The 'Webcams' menu item appears when there is any webcam(s)
connected to the SRC, or when there are snapshots saved onto the SRC
already.
Webcam Management
Scenario (1): If your SRC has onboard door handle ports, such as
SRC-0102, 'SmartLock' or both menu items appear.
Scenario (2): If your SRC does NOT have onboard door handle ports, such
as SRC-0100, then it does NOT show either item by default. Either or both
menu items appear only when you connect Raritan's SmartLock kit to this
product. For details, refer to the user documentation accompanying the
SmartLock kit or download it from Raritan's
http://www.raritan.com/support/
(
product via DX2-DH2C2. Note that this page is not available if connecting
the door handles to other Raritan sensors than DX2-DH2C2.
indirectly.
SmartLock and Card Reader
User Management
Device Settings
(on page 167).
Maintenance
(on page 316).
(on page 342).
Support page
).
(on page 356).
(on page 155).
Chapter 6: Using the Web Interface
105