Page 3
How do I remove a light so it no longer appears in LC7001? my App? How do I use Google Home to control the LC7001? How do I rename a light? Whole House Lighting Controller - LC7001 1308243 REV. C...
This user guide (P/N 1308243) provides operating information for the Legrand Whole House Lighting Controller (LC7001) and the Lighting Control iOS/Android mobile app. The LC7001 is compatible with all dimmer, switch, and scene controller products in both the radiant (RF Lighting Control) and adorne (Wi-Fi Ready) collections.
Prerequisites The proper function and control of the LC7001 Whole House Lighting Controller depends on the following requirements: • proper installation, configuration, and house/group binding of all system components, per Legrand instructions, prior to the installation of the LC7001. •...
Android devices (iOS coming soon) and is not required for the operation of the lighting system. NOTE: The mobile app and the LC7001 firmware must be version 2.0 or later to enable the Samsung ARTIK Cloud functionality. Whole House Lighting Controller - LC7001...
For instruction on creating and integrating a Samsung ARTIK Cloud account with the LC7001, refer to “Setting up Remote Access” in the Legrand Whole House Lighting Controller User Guide or navigate to <Settings <Remote Access Info <Remote Access Setup in the Legrand Lighting Control app.
Page 9
Device discovery can take up to 20 seconds. • Device discovery must be performed when devices are added to the system. In the Alexa app, navigate to Smart Home. Under Your Devices, select Discover Devices. Whole House Lighting Controller - LC7001 1308243 REV. C...
Grouping Discovered Devices Use the Alexa app to designate groups of Legrand Lighting Control System devices. Groups allow control of multiple devices using a single Alexa command. Example: A group named “basement” can have multiple devices located in the basement assigned to the group for control at one time.
Commanding “Alexa, [dim/brighten] my [device]” results in an adjustment level of 25% for dimmable devices. Commanding “Alexa, [dim/brighten] my [group name]” results in an adjustment level of 25% for only the dimmable devices in the group. Whole House Lighting Controller - LC7001 1308243 REV. C...
For instruction on creating and integrating a Samsung ARTIK Cloud account with the LC7001, refer to “Setting up Remote Access” in the Legrand Whole House Lighting Controller User Guide or navigate to <Settings <Remote Access Info <Remote Access Setup in the Legrand Lighting Control app.
Page 13
Choose Samsung ARTIK Cloud. Follow the steps to grant permission to the user’s Samsung ARTIK Cloud account to integrate with Google Home. After receiving a successful integration message, tap Got It. Whole House Lighting Controller - LC7001 1308243 REV. C...
Assigning Devices Google Home supports the control of Legrand Lighting Control System devices, and other enabled devices, with a single voice command using the ROOMS tab. For details on setting up rooms, follow Step 4 of the instructions on the Google support site at: https://support.
The system discovery process initiates when opening the Legrand Lighting Control app for the first time. System discovery adds devices to the LC7001 by wirelessly discovering a lighting device in the home after it is touched. A prompt appears to begin adding devices.
The Lights page appears, displaying the names of all controllable lighting devices within the system. This screen shows the following options: • : status of each lighting device (blue indicates ON). • : current brightness level. Whole House Lighting Controller - LC7001 1308243 REV. C...
Page 17
• : Tap [+] to add a new device to the LC7001. Similar to the system discovery process, when selecting , a prompt appears requesting that you tap the lighting device to be added. Once tapped, the device becomes part of the system and a prompt appears to name the device.
• Never : scene is triggered manually. • Once : scene automatically runs one time. • Weekly : scene repeats weekly based on the day(s) and time defined. Whole House Lighting Controller - LC7001 1308243 REV. C...
Page 19
AM or PM Sunrise or Sunset <Repeat Press to return to the Repeat pop-up box and see your updated selections. Press <Add A Scene to return to the scene creation screen. Whole House Lighting Controller - LC7001 1308243 REV. C...
Page 20
NOTE: When using a Legrand Scene Controller with a “Toggle Scene ON/OFF” button assigned, the fade rate applies only when the scene is ON. A second button press turns the lighting devices ON or OFF at the system default rate. This setting is not adjustable. Learn...
Name of Scene A pop-up box appears with change options for that scene: • Name. • Repeat settings. • Fade Rate settings. • Individual device settings. Whole House Lighting Controller - LC7001 1308243 REV. C...
Set Time Zone Time Zone Check mark the desired time zone by tapping the appropriate time zone name. Set Daylight Savings Time to turn the “Observe Daylight Savings Time” setting ON or OFF. Whole House Lighting Controller - LC7001 1308243 REV. C...
In-Wall Scene Controllers Legrand Scene Controllers provide the ability to manually trigger scenes created in the LC7001 Whole House Lighting Controller. This section describes how to control scene controllers designed to work with the LC7001. NOTES: • The LC7001 supports a maximum of 40 compatible scene controllers.
Page 24
Each controller button is called a Bank. > to the right of a bank. New menu options appear, showing a list of all scenes available to assign to a Bank. Whole House Lighting Controller - LC7001 1308243 REV. C...
Page 25
LED indicator light. When pressing the button of an inactive scene, the scene activates and the LED indicator becomes bright. Adjust the active scene by repeatedly pressing the “+” and “-“ buttons on the scene controller. Press-and-hold will not function. Whole House Lighting Controller - LC7001 1308243 REV. C...
Page 26
Repeat this process for the remaining banks on the scene controller. Removing a Controller Within Settings, select In Wall Scene Controllers Choose Edit next to the scene name to be removed. Choose Delete Whole House Lighting Controller - LC7001 1308243 REV. C...
Manually updating firmware is optional. Updates should happen automatically. Check the current version of the app The current version of the app appears to the right of the App Version option. Whole House Lighting Controller - LC7001 1308243 REV. C...
Apple Watch Operation Using the Apple Watch The Legrand Lighting Control app is compatible with the Apple Watch when it is paired with an iPhone that has the Legrand Lighting Control app installed. The Legrand Lighting Control app automatically appears on the Apple Watch home screen once connected.
The most used lighting devices and scenes always appear near the top of the list. Scenes Screen The Scenes screen displays the available scenes configured on the LC7001. • Tap the individual scene name to execute the desired scene. Whole House Lighting Controller - LC7001 1308243 REV. C...
Page 30
For technical assistance on your Lighting Control app, contact On-Q Technical Support between 8 AM and 6:30 PM EST. Phone: 717-546-5412 Email: technical.support-hs@legrand.us Chat: www.legrand.us/on-q (Click on the icon to open a dialogue box)