Replacing The Fuses - Yamaha MT-15 Owner's Manual

Periodic maintenance and adjustment
3. Fully charge the battery before in-
stallation. NOTICE: When install-
ing the battery, be sure to turn
the main switch off, then con-
nect the positive lead before
connecting the negative lead.
[ECA16842]
4. After installation, make sure that
the battery leads are properly con-
nected to the battery terminals.
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.
7

Replacing the fuses

3
2
1
ECA16531
1. Main fuse
2. Headlight fuse
3. Terminal fuse 1
4. Spare fuse
The fuse box is located under the rider
seat.
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
7-31
EAU53044 avoid causing extensive dam-
age to the electrical system and
possibly a fire.
Specified fuses:
Main fuse:
4
Headlight fuse:
Terminal fuse 1:
3. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
[EWA15132]
15.0 A
7.5 A
2.0 A