Yamaha MT-15 Owner's Manual page 27

6. Push the "SELECT" button to start
the clock.
Instantaneous fuel consumption
mode
1
1. Instantaneous fuel consumption display
This shows the current fuel consump-
tion when the vehicle is traveling at
least 10 km/h. There are two display
modes: "km/L" and "L/100 km". To
switch the instantaneous fuel con-
sumption display between "km/L" and
"L/100 km", push the "SELECT" but-
ton for one second.
"km/L": the distance that can be
traveled on 1.0 L of fuel under cur-
rent riding conditions.
Instrument and control functions
"L/100 km": The amount of fuel
necessary to travel 100 km under
current riding conditions.
TIP
When traveling at speeds under
10 km/h, "_ _._" is displayed.
The instantaneous fuel consump-
tion function should be used for
general reference only. Do not use
this figure to estimate the distance
that can be traveled on the current
tank of fuel.
Average fuel consumption mode
1
1. Average fuel consumption display
This shows the average fuel consump-
tion since it was last reset. There are
two display modes: "AVE_ _._ km/L"
4-8
and "AVE_ _._ L/100 km". To switch
the average fuel consumption units,
push the "SELECT" button for one sec-
ond. To reset the average fuel con-
sumption display, push and hold the
"RESET" button.
"AVE_ _._ km/L": the average dis-
tance traveled on 1.0 L of fuel.
"AVE_ _._ L/100 km": the average
amount of fuel used to travel 100
km.
TIP
After resetting the average fuel
consumption, "_ _._" will be
shown until the vehicle has trav-
eled 1 km.
The average fuel consumption
function is for general reference
only. Do not use this figure to esti-
mate the distance that can be
traveled on the current tank of fu-
el.
4