H3C S3600 Series Operation Manual page 5

Operation Manual – SSH Terminal Service
H3C S3600 Series Ethernet Switches-Release 1510
Table 1-1 SSH2.0 Server configuration tasks
Configure user interface(s) to
support specified protocol(s)
Generate local RSA key pairs
Destroy local RSA key pairs
Create an SSH user
Specify
authentication type for SSH
users
Configure authentication type
for an SSH user
Set
timeout time
Set SSH authentication retry
times
Set server key update interval
Configure SSH server to be
compatible
clients
Configure a client public key
for an SSH user
I. Configuring user interface(s) to support specified protocol(s)
Table 1-2 Configure user interface(s) to support specified protocol(s)
Enter system view
Enter the view of one or
multiple user interfaces
Set
authentication method
Operation
a default
SSH authentication
with SSH1.x
Operation
system-view
user-interface
[ type-keyword ] number
[ ending-number ]
authentication-mode
the login
scheme
[ command-authorizatio
n ]
Command
protocol inbound
rsa local-key-pair create
rsa local-key-pair
destroy
ssh user username
ssh authentication-type
default
ssh user username
authentication-type
ssh server timeout
ssh server
authentication-retries
ssh server
rekey-interval
ssh server
compatible-ssh1x
enable
ssh user username
assign rsa-key keyname
Command
1-4
Chapter 1 SSH Terminal Service
Related section
Section "Configuring
user interface(s) to
support specified
protocol(s)"
Section "Generating
or destroying
RSA key pairs"
Section "Create an
SSH user"
Section"Configuring
authentication type for
a user"
Section "Configuring
SSH management
Section "Configuring a
client public key for a
user"
Description
—
Required
Required
local