H3C S3600 Series Operation Manual page 8

Operation Manual – SSH Terminal Service
H3C S3600 Series Ethernet Switches-Release 1510
Table 1-5 Configure authentication type for a user
Enter system view
Specify
authentication
SSH users
Configure authentication
type for an SSH user
Note that:
The ssh authentication-type default command is used to configure the default
authentication type for all SSH users.
The ssh user username authentication-type command is used to configure an
authentication type for a specific SSH user.
When both commands are configured with different authentication types, for the
specific user (user specified by the username argument), the authentication type
specified by the ssh user username authentication-type command will take
effect instead of that specified for all SSH users.
Operation
system-view
ssh authentication-type
a default
default { password | rsa
type for
| password-publickey |
all }
ssh
authentication-type
{
password-publickey
rsa| all }
Chapter 1 SSH Terminal Service
Command
user username
password |
|
1-7
Description
—
At least one required;
By default,
authentication type
specified for an SSH user,
and the user can not
access the switch.
no
is