Changing Device Settings (Setup Mode) - R-Biopharm RIDA QUICK SCAN Manual

3.3 Changing device settings (SETUP MODE)

Various basic settings can be adjusted in SETUP MODE. These settings remain stored even
after the device is switched off.
To do this, select the individual entry fields with the cursor keys ▲▼ and then change the
parameters using the ◄► keys.
Setup Mode
Backlight ON
Language EN
Date 18.01.2009
Time 09:02:35
▲▼
Setup Mode
Date 18.01.09
Time 09:02:35
Time-format
12 am/pm
PowerOff time 1min
▲▼
Figure 14
The display can show up to four parameter entries. If a menu contains more than four
parameters, when you reach the bottom entry on the first page the second page with the
other parameters is displayed automatically.
When you reach the bottom entry you can press the ▼ key to use the wrap-around function.
The cursor then jumps to the top position of the display again. This means that you do not
have to scroll the entire menu to get to the top of the parameter list.
14
►
Backlight:
Language:
Date:
Time:
Time format:
PowerOff Time: Time until the device switches off
►
◄►
Display background lighting on or off
Choose menu language
Set the date
Set the time
Set the time format
(24 hours or 12 hours am/pm)
automatically when it is not in operation