R-Biopharm RIDA QUICK SCAN Manual page 13

Test invalid, must be repeated:
16
◄
Result
° C
DON Cut off
INVALID
18.01.09 B
◄►
Print
Figure 13
Use "Print" to print the result and "Next" to go directly to the next measurement. After you
select "Print" the device automatically goes to the start of the next measurement. If you do not
want to print the result at that time (e.g. no printer connected), you can call it up from
MEMORY MODE (see Section 3.4) at a later date and print it out then.
In the following measurements "Start Scan" is selected automatically and all you have to do is
press ENTER twice to perform the next measurement.
►
09:00 pm
Next
13