TVS Jupiter Fi Owner's Manual page 46

MAINTENANCE
4. After obtaining the necessary free play, inspect
for the clearance between the bullet (3) and slot
end (4) marked as "S" as shown in the figure.
5. If any clearance is found, turn the adjuster nut (2)
at the top side in the slot marked as "S" in
clockwise direction until there is no clearance
between the bullet top (3) and the slot top (4).
6. After adjusting the adjuster nut top, If any
clearance is observed in between the bullet
bottom (5) and the slot bottom (6) marked as "I"
as shown, then turn the adjuster nut (2) in
anti-clockwise until there is no clearance.
7. Once again check and confirm the brake play at
the lever end.
Warning
Since the vehicle is fitted with Synchronised
Braking System (SBS) adjust the brakes with
additional care. If not it may result in brakes not
working properly. Please contact TVS Motor
Company Authorised
Authorised Service Centers
-37-
Distributor or Dealer /
for any further assistance.