Advertisement
MAINTENANCE
4. Fuse holder contains a 10A x 2nos fuse. Open the
fuse case and pull out the fuse.
5. Inspect the fuse for failure. If found defective,
replace the fuse (extra fuse is provided inside the
fuse holder itself).
6. Close the fuse holder.
7. Turn 'ON' the ignition switch and check for proper
functioning of electrical systems. Incase the fuse
fails again, consult the nearest TVS Motor
Company Authorised Distributor or Dealer /
Authorised Service Centers.
Extra fuses
Do not use vehicle by shorting the wires without
fuse. This may result in overheating of electrical items
/ wiring and may result in fire. Do not use fuse of
higher amperage than specified for the safety of
electrical system.
SPARK PLUG
1. Remove the cover front as explained earlier.
2. Clean the dust and mud around the spark plug
3. Pull out the suppressor cap from spark plug. Using
-33-
Good Fuse
Caution
mounting to avoid falling inside the cylinder.
the spark plug spanner, remove the spark plug.
Blown Fuse
Hide quick links:
Advertisement
