Spares And Accessories; Ats430 Spares; Ats 430 Accessories; Ezlink Digital Sensor Extension Cables - ABB Aztec ATS430 Operating Instructions Manual

9 Spares and accessories

9.1 ATS430 spares

Part number Description
ATS4000788 Replacement O-ring (pack of 2)
ATS4000799 Wiper replacement kit (pack of 6)
Table 9.1 ATS430 spares

9.2 ATS 430 accessories

Part number Description
ATS4000650 ATS430 Sensor calibration and verification kit
ATS4000725 Wiper arm protection shroud
ATS4000740 Calibration pot
ATS4000717 Hook wrench, Ø40 mm
Table 9.2 Accessories

9.3 EZLink digital sensor extension cables

Part number Description
AWT4009010 1 m (3.2 ft.) extension cable
AWT4009050 5 m (16.4 ft.) extension cable
AWT4009100 10 m (32 ft.) extension cable
AWT4009150 15 m (49.2 ft.) extension cable
AWT4009250 25 m (82 ft.) extension cable
AWT4009500 50 m (164 ft.) extension cable
Table 9.3 EZLink digital sensor extension cable
26 OI/ATS430–EN Rev. H | Aztec ATS430 | Turbidity sensor

9.4 Mounting accessories

Part number Description
ATS4000741 Flow cell
ATS4000785 Open tank flanged dip mount
ATS4000768 Open channel mounting kit supplied with
3 mm (9.8 ft.) chain
ATS4000720 Chain fitting adaptor kit supplied with
3 mm (9.8 ft.) chain
ATS4000700 Wall mounting bracket for dip pole
(40 mm or 1.25 in NB)
ATS4000760 Handrail mounting bracket (Tilt) for dip pole
(40 mm or 1.25 in NB) suitable for 42 or 51 mm
(1.7 or 2.0 in.) dia. handrail
ATS4000762 Handrail mounting bracket (Swivel & Tilt) for
dip pole (1.25 in NB) suitable for 42 or 51 mm
(1.7 or 2.0 in.) dia. handrail
ATS4000763 Handrail mounting bracket (Swivel & Tilt) for
dip pole (40 mm) suitable for 42 or 51 mm
(1.7 or 2.0 in.) dia. handrail
ATS4000751 Pole mounting adaptor kit (straight) for attachment
to 40 mm or 1.25 in NB pole
ATS4000710 Pole mounting adaptor kit (90°) for attachment to
1.25 in NB pole
ATS4000711 Pole mounting adaptor kit (45°) for attachment to
1.25 in NB pole
ATS4000714 Pole mounting adaptor kit (90°) for attachment to
40 mm pole
ATS4000715 Pole mounting adaptor kit (45°) for attachment to
40 mm pole
ATS4000750 Dip / pole assembly (straight), metric 2.5 m (8.2 ft)
ATS4000716 Dip / pole assembly (90° bend), metric 2.5 m (8.2 ft)
ATS4000719 Dip / pole assembly (45° bend), metric 2.5 m (8.2 ft)
ATS4000780 Retractable insertion assembly
ADS430168 Flow cell spares kit – contains replacement push-fit
connectors, o-ring, gasket and base plug
ATS4000796 Retractable insertion assembly spares kit –
contains replacement o-rings, washers and circlip
Table 9.4 Mounting accessories
9.5 Replacement parts for ATS430 sensor calibration and
verification kit (part no. ATS4000650)
Part number Description
ATS4000692 Replacement puck, low, non wiper
(typically 900 NTU)
ATS4000693 Replacement puck, high, non wiper
(typically 2500 NTU)
ATS4000697 Replacement puck, low (wiper)
(typically 900 NTU)
ATS4000698 Replacement puck, high (wiper)
(typically 2500 NTU)
ATS4000643 ATS430 sensor calibration coupling agent (15 ml)
Table 9.5 Replacement parts for ATS430 sensor calibration and
verification kit (part no. ATS4000650)