®
ABB i-bus
KNX
Commissioning
3.2.5
Parameter window A: Scenes
This parameter window is shown if the corresponding function is enabled in
p. 26.
The function Scenes can be used for direct activation of certain predefined input values (as a percentage
and depending on the output range). These output values are then used to output the associated output
value (according to the characteristic, if applicable) at the output.
Note
Scene values are always affected by the characteristic.
Parameter window A:
AA/S 4.1.2, AA/A 2.1.2 | 2CDC505163D0201 43
General,