Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
3.2
Parameters
The ETS Engineering Tool Software is used to parameterize the device.
In ETS, the application is located in the Catalogs window under Manufacturers/ABB/Output/Analog Output.
The following chapters describe the device parameters using the parameter windows. Parameter windows
are structured dynamically so that further parameters may be enabled depending on the parameterization
and the function.
The default values of the parameters are underlined, e.g.:
Options:
Note
The device has several channels. However, as the functions for all the channels are identical, all the
descriptive examples show the functions for Channel A.
Note
The screenshots showing the AA/S 4.1.2 application in ETS 4 are representative of all devices.
20 2CDC505163D0201 | AA/S 4.1.2, AA/A 2.1.2
Yes
No
Advertisement
Table of Contents
