Non-Combustible Materials; Combustible Materials; Electrical Codes - Quadra-Fire PIONEER-III-ABK Installation Manual

Epa certified woodburning fireplace
Hide thumbs Also See for PIONEER-III-ABK:
Table of Contents

Advertisement

E. Non-Combustible Materials
Material which will not ignite and burn, composed of any
combination of the following:
- Steel
- Brick
- Concrete
- Glass
Materials reported as passing ASTM E 136, Standard
Test Method for Behavior of Metals, in a Vertical Tube
Furnace of 750° C.
F. Combustible Materials
Material made of or surfaced with any of the following
materials:
- Wood
- Plant Fibers
- Plywood/OSB
-Foam insulation & sealants
Any material that can ignite and burn: flame proofed or
not, plastered or un-plastered.
G. Electrical Codes
NOTICE:
This fireplace must be electrically wired and
grounded in accordance with local codes or, in the
absence of local codes, with National Electric Code ANSI/
NFPA 70-latest edition or the Canadian Electric Code
CSA C22.1.
• A 110-120 VAC circuit for this product must be protected
with ground-fault circuit-interrupter protection, in
compliance with the applicable electrical codes, when
it is installed in damp locations.
WARNING! Improper installation, adjustment, alteration,
service or maintenance can cause injury or property dam-
age.
Quadra-Fire • PIONEER - III • 4182-901 Installation Manual • Rev C • 07/19
- Plaster
- Iron
- Tile
- Slate
- Compressed Paper
- Plastic
- Sheet Rock (drywall)
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pioneer-iii-rbk

Table of Contents