Nexio Amp® Gen - Imagine communications Nexio AMP Gen-7 Series Hardware Manual

Nexio AMP® Gen-7
Indicator
Back Panel
Back panel components are identified in the drawing. Please note that the exact placement of each
device may vary slightly from this drawing.
Motherboard I/O
The motherboard connectors are represented in the drawing and identified in the table.
Index Connector
A IPMI LAN
B RS-232 Serial LTC Input
C 4 USB 2.0 port connectors
D Gigabit LAN 1 and LAN 2
E Integrated VGA (Covered)
Card Slots
Index Card
1 DVI port on left / Display port on right
2 Empty
3 Broadcast Video I/O
4 AES Audio Breakout ports.
1 - 2 Port (left) – first 2 record and playback channels
3 - 4 Port (right) – last 2 record and playback channels
5 HDI – SAS Host Adapter (no outputs)
HDX – Fibre Channel (with outputs)
6 Gigabit LAN 3 and LAN 4
7 AB4 card / VHDCI Breakout Cable to RS-422 and GPI
2014 Imagine Communications | All Rights Reserved
Description
Overheat / Fan Fail. When flashing, this LED indicates a fan failure. When on but
not flashing, this LED indicates an overheat condition which may be caused by an
airflow obstruction or ambient room temperature that is too high.
Chassis Components
Page 7 of 42