Imagine communications Nexio AMP Gen-7 Series Hardware Manual page 21

Nexio AMP® Gen-7
4. Push the middle rail back into the outer rail.
5. Hang the hooks on the front of the outer rail onto the slots on the front of the rack. Use screws to
secure the outer rails to the rack as needed.
6. Pull out the rear of the outer rail, adjusting the length until it fits within the posts of the rack.
7. Hang the hooks of the rear portion of the outer rail onto the slots on the rear of the rack. Use screws
to secure the rear of the outer rail to the rear of the rack.
2014 Imagine Communications | All Rights Reserved
Installing the Rail Assemblies
Page 21 of 42