Chapter 3 Configuring The Software; Downloading Nexio Software; Registering The Software License - Imagine communications Nexio NX1011 MGX Hardware Manual

Nexio® NX1011 Series
Hardware Guide
Chapter 3
Configuring the Software
You must perform the following tasks to configure your Nexio device:

Download the Nexio Software

Register your Nexio Software License

Access the Nexio Config software application.

Downloading Nexio Software

Locate your Nexio software at the following web location:

https://files.imaginecommunications.com/get
1. Navigate to: Public > 060 Transmissions and Specialty Servers > Software Release and choose the
highest software version number. The files you need are split into two self-extracting files.
NexioX.X: the main installation files
NexioX.X_Drivers_and_SAs: the most recent service alerts and drivers.
2. You can extract the installation files onto the root of a USB flash drive. This gives you a baseline
image to use in the future for backup and recovery.
3. Plug the USB flash drive into your device. Browse to the latest Nexio Software Release files and
double-click NEXIOSetup.exe. When the pop-up displays, click Yes to copy the files onto the local
hard drive. Click No to run the installation from its location on the USB flash drive.
4. When the Nexio Setup application displays, you can use it to set up your server.

Registering the Software License

You must register the software before you can configure your device. Here is a summary list of steps you
must take to activate your Nexio software license.

Use the Registration Manager software to generate a .dc file.

Email the .dc file along with your ordering information to Imagine Communications Customer
Support.

Wait for Customer Support to send you an .rc file by return email (not more than one business day.)

Use the Registration Manager and the .rc file to register your Nexio Software.
© 2014 Imagine Communications Corp. Proprietary and Confidential.
Chapter 3
Configuring the Software
September 2014 | Page 16