Front Panel; Disk Drive Leds; Front Panel Buttons; Front Panel Leds - Imagine communications Nexio AMP Gen-7 Series Hardware Manual

Nexio AMP® Gen-7

Front Panel

Disk Drive LEDs

Each disk drive carrier has two LEDs.

Green or Blue. Each hard disk drive has either a green or blue LED that indicates drive activity. This
LED will blink on and off when the drive is being accessed.

Red. The red LED indicates a drive failure.

Front Panel Buttons

Button

Front Panel LEDs

Indicator
2014 Imagine Communications | All Rights Reserved
Description
Power. Use the power button to apply or remove power from the internal power
supply to the server. When you turn off power using the button, you remove the
main power but keep standby power. You must unplug the system to remove all
power.
Reset. Use the reset button to reboot the system. You will need to use a pen or
another small pointed device to work this reset button.
Description
Power.
Green indicates the system is on.
Amber indicates the system is off and plugged in.
HDD. Indicates IDE channel activity. When flashing, indicates SAS2/SATA drive
activity.
NIC 1. When flashing, this LED indicates network activity on GLAN1.
NIC 2. When flashing, this LED indicates network activity on GLAN2.
Power Failure. When flashing, this LED indicates a failure in one of the power
supplies.
Chassis Components
Page 6 of 42