Wiznet WizFi630 Serial Command Manual page 27

Connection
<OU>
Option
<OU>
0: TCP Client Mode, Serial to LAN
Set
OU
auto connection
1: TCP Client Mode, Serial to LAN
connection made in serial date in
Get RO <RO>
<WOx_x_x_a.b.c.d_x>
Enable[_Protocol_Mode_ServerIP
or Domain_ServerPort]
Enable: 0(Disable), 1(Enable),
Disable
Main Port
( In disable, other data is ignored
Set WO
Protocol: 0(UDP), 1(TCP)
Mode: 0(Server), 1(Client),
2(Mixed)
ServerIP: a.b.c.d
Domain: xxx.yyy.zzz
ServerPort: 0-65535
Get RU <RU>
<WUx_x_x_a.b.c.d_x>
Enable[_Protocol_Mode_ServerIP or
Domain_ServerPort]
Enable: 0(Disable), 1(Enable)
Aux Port
(In Disable, other data is ignored)
Set
WU
Protocol: 0(UDP), 1(TCP)
Mode: 0(Server), 1(Client)
ServerIP: a.b.c.d
Domain: xxx.yyy.zzz
ServerPort: 0-65535
Get RE <RE>
<WEx>
0: send incoming serial data to LAN
main and aux port
Data Flow
Set WE 1: send incoming serial data to LAN
main
2: send incoming serial data to LAN
Aux
Get Insert
Get RZ <RZ>
Tag
<WZx_xxx_xxx>
enable(0-1)[_main-delimeter1_aux-
delimeter]
Insert Tag Set WZ
0: disable(default)
1: enable
delimeter mac 16 characters16 chars
<CCxxxx_xx>
Client
Set CC ip-address_port, ip-address: a.b.c.d,
Mode
port: tcp port(0-65535)
Connection
Get CS <CS>
Status
Connection <CQx>
Set CQ
End (0-65535)
Data Mode Set AT <ATDT>
Command
Set <+++>
+++
Mode
Mode
Get AT <ATDT?>
Status
Set TCP Connection Option
Get Main Port Status
Set Main Port Status
Get Aux Port Status
Set Aux Port Status
CIMOS specific commands
CIMOS specific commands
Set seral data tag for main and aux
set serial main port connection for specific
client only
get serial main port connection for specific
client only
same with <RC> but response is different
change serial main as TCP server mode. For
specific client only
change serial server as Data(Normal) Mode
change serial server as Command Mode
get current serial server mode
25