Electrical Connection - Miele 11 196 580 Operating And Installation Instructions

Installation

Electrical connection

Electrical connection: UK
All electrical work should be carried out
by a suitably qualified and competent
Miele approved service technician in
strict accordance with current national
and local safety regulations (BS 7671 in
the UK).
This appliance is supplied with a mains
cable for connection to a 230 V, 50 Hz
single phase supply.
The voltage and connected load are
given on the data plate situated at the
front of the oven interior. Please ensure
that these match the household mains
supply.
Connection should be made via a fused
connection unit or a suitable isolator,
which complies with national and local
safety regulations, and the on/off switch
should be easily accessible after the
appliance has been installed.
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
Switches with a minimum all-pole
contact gap of 3 mm are suitable for
isolating the appliance. These include
circuit breakers, fuses and protective
devices.
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD). Please contact a
qualified electrician for advice.
If the cable is damaged a new cable
must be fitted by a Miele approved
service technician.
114
This appliance conforms with European
Standard EN 55011 as a Group 2,
Class B product. Group 2 appliances
use high frequency energy in the form
of electro-magnetic waves to create
heat in food. Class B is assigned to
appliances that are suitable for
domestic use.
Important UK
The wires in the mains lead are
coloured in accordance with the
following code:
– Green/yellow = earth
– Blue = neutral
– Brown or black = live

WARNING - THIS APPLIANCE
MUST BE EARTHED