Miele 11 196 580 Operating And Installation Instructions page 9

Technical safety

Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.

Damage to the oven can compromise your safety. Check the oven
for visible signs of damage. Do not use a damaged oven.

Reliable and safe operation of this oven can only be assured if it
has been connected to the mains electricity supply.

Operating a damaged oven can result in microwave leakage and
present a hazard to the user. Do not use the oven if:
– the door is warped.
– the door hinges are loose.
– holes or cracks are visible in the casing, the door or the oven
compartment walls.

The electrical safety of this oven can only be guaranteed when
correctly earthed. It is most important that this basic safety
requirement is fulfilled. If in doubt, the electrical installation should
be checked by a qualified electrician.

The connection data (voltage and frequency) on the data plate of
the oven must match the mains electricity supply in order to avoid
the risk of damage to the oven. Compare this before connecting the
appliance to the mains. If in any doubt, consult a qualified
electrician.

Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance. Do not use these to connect the
oven to the mains electricity supply.

For safety reasons, the oven may only be used when it has been
fully installed.

The oven must not be used in a non-stationary location (e.g. on a
ship).
Warning and safety instructions
9