Electrical Connection - Miele M 7240 TC Operating And Installation Instructions

Electrical connection


Risk of injury due to electric
shock.
During installation, maintenance, and
repair work, the microwave oven
must be completely disconnected
from the power supply:
Disconnect the microwave oven from
the power supply by tripping the
breakers, or unplugging the power
cord from the outlet. To do this, pull
the plug not the cord.

Risk of injury.
Installation, repairs, and other work
by unqualified persons could be
dangerous. Miele cannot be held
liable for unauthorized work.
Installation, maintenance, and repairs
must only be carried out by a Miele
authorized technician.
The connection data (voltage,
frequency and max. rated load) on
the data plate of the microwave oven
must match the power supply in
order to avoid the risk of damage to
the microwave oven.
The connection data can be found
on the data plate, which is visible on
the front frame or at the back of the
microwave oven. Compare this
before connecting the appliance to
the power supply. If in any doubt,
consult a qualified electrician.
For safety reasons, the microwave
oven may only be used when it has
been fully installed.
The power cord plug must be
inserted into a suitable outlet that
has been installed and grounded in
compliance with all applicable local
codes.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.
Installation
23