Miele 11 196 580 Operating And Installation Instructions page 105

Problem
The sensor controls or
the movement sensor
do not respond.
System lock  appears in
the display when the
oven is switched on.
Power cut -process
cancelled appears in the
display.
appears in the
12:00
display.
Cause and remedy
You have selected the
When the oven is switched off, the sensor controls
and the movement sensor do not respond.
 As soon as the oven is switched on, the sensor
controls and the movement sensor will respond. If
you want the sensor controls and the movement
sensor to respond even when the oven is switched
off, select the
The settings for the movement sensor are switched
off.
 Change the settings for the movement sensor by
selecting
Settings
The movement sensor is defective.
 Call the Miele Customer Service Department.
The oven is not connected to the power supply.
 Check that the oven plug is correctly inserted into
the socket and switched on.
 Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
If the display does not respond, there is a fault with
the controls.
 Touch and hold the  On/Off button until the
display switches off and the oven restarts.
The  system lock has been activated.
 You can deactivate the system lock for a cooking
programme by touching the  symbol for at least
6 seconds.
 If you want to permanently deactivate the system
lock, select the
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Switch the oven off and then back on again.
 Restart the cooking programme.
The power supply was interrupted for longer than
150 hours.
 Reset the time and date.
Problem solving guide
Display | QuickTouch
Display | QuickTouch
|
Proximity sensor
Safety | System lock 
| Off setting.
| On setting.
.
| Off setting.
105