Miele 11 196 580 Operating And Installation Instructions page 10

Warning and safety instructions

Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the oven will endanger your safety and may lead to
the oven malfunctioning.
Do not open the oven housing under any circumstances.

While the oven is under warranty, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty will be invalidated.

Miele can only guarantee the safety of the oven when original
Miele spare parts are used. Faulty components must only be
replaced by original spare parts.

If the oven is delivered without a power connection cable, a
special cable must be installed by a Miele authorised service
technician (see "Installation", "Electrical connection").

If the connection cable is damaged, it must be replaced with a
special connection cable by a Miele authorised service technician (see
"Installation", "Electrical connection").

During installation, maintenance and repair work, the oven must
be completely disconnected from the mains electricity supply. To
ensure this:
– disconnect the mains fuse, or
– completely unscrew the screw-out fuse (in countries where this is
applicable), or
– pull out the plug (if one is present) at the wall socket. To do this,
pull the plug and not the mains connection cable.

The oven requires a sufficient supply of cool air for efficient operation.
Make sure that the supply of cool air is not hindered in any way (e.g. by
fitting heat insulation strips in the housing unit). Furthermore, the required
supply of cool air must not be excessively heated by other heat sources
(e.g. solid fuel stoves).
10