Cleaning And Care; Unsuitable Cleaning Agents - Miele 11 196 580 Operating And Installation Instructions

Table of Contents

Advertisement

Cleaning and care

Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, oven compartment
or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before manual cleaning.
Risk of injury due to electric
shock.
The steam from a steam cleaning
appliance could reach live electrical
components and cause a short
circuit.
Do not use a steam cleaner to clean
the oven.
All surfaces could be discoloured or
damaged if unsuitable cleaning
agents are used. The oven front is
particularly susceptible to damage
from oven cleaners.
All surfaces are susceptible to
scratching. Scratches on glass can in
some circumstances lead to
breakage.
Remove all cleaning agent residues
immediately.
Stubborn soiling could damage the
oven in certain circumstances.
Once the oven has cooled, clean the
oven compartment, the inside of the
door and the door seal. Waiting too
long can make cleaning
unnecessarily difficult and in some
cases impossible.
100
Operating a damaged oven can
result in microwave leakage and
present a hazard to the user.
Check the door and door seal for any
sign of damage. If any damage is
noticed, the oven should not be used
again with microwave functions until
the fault has been rectified by a
service technician.

Unsuitable cleaning agents

To avoid damaging the surfaces, do not
use:
– Cleaning agents containing soda,
ammonia, acids or chlorides
– Cleaning agents containing descaling
agents on the oven front
– Abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
– Solvent-based cleaning agents
– Stainless steel cleaning agents
– Dishwasher cleaner
– Glass cleaning agents
– Cleaning agents for ceramic glass
hobs
– Hard, abrasive brushes or sponges,
(e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents)
– Melamine eraser blocks
– Sharp metal scrapers
– Wire wool
– Spot cleaning with mechanical
cleaning agents
– Oven cleaners *
– Stainless steel spiral pads
* These can, however, be used to
remove very heavy soiling from
PerfectClean treated surfaces

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents