Table of Contents
Advertisement
Fingerprint Command
To show verification results/record summary on standard I/O or label after the last
verification database been reset.
VERIFIER RESULT [PRINT]
Argument
PRINT
Send this command to retrieve summary of verification results. A typical result
might be:
•
•
•
To get the summary printed on the label:
VERIFIER > RESULT > PRINT
This Fingerprint command reads system array or setting system variables for Veri-
fier status retrieving.
Syntax: SYSVAR(<nexp>)
Parameter
<nexp>
No.
105
106
PX940 User Guide
Description
To print the summary on the label
Verified: 104 labels
Failed: 3 labels
Failure Rate: 2.9%
Description
Reference number of the system variable as described in the next table.
Description
Read Label Verification Status
Read Label Verification Result
Notes
Read the label verification status
0 = Label verification not
completed
1 = Label verification completed
Read label verification result
0 = Label verification pass
Non-Zero = Label verification
failed, and error code is returned.
59
Advertisement
Table of Contents
