Report Header - Honeywell PX940 User Manual

Report Header

Read/No
Content
Read
Label ID Yes
PrintJob ID Yes
Verification Yes
Type
Passing No
Grade
Threshold
Hardware Yes
Aperture
Date Yes
Time Yes
Last Yes
Calibration
Date
Label Grade No
Label Status Yes
Failure Yes
Reason
PX940 User Guide
GS1
ISO 15415/ General
15416 (out of
scope)
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Description
Unique counter for each printed label. Reset to 1 when
user reset the verification user storage/database
Example:
<Label ID="1"> - First label verified after reset.
Unique counter for each print job. Reset to 1 when user
reset the verification user storage/database
Example:
<PrintJobID>1<PrintJobID> - First print job after reset
Barcode verification type
Example:
<VerificationType>Read/No Read</VerificationType>
Passing grade threshold - not applicable for the Read/No
Read and GS1 application. GS1 will have an individual
passing grade for each barcode type defined in the
profile.
Example:
<PassingGrade>1.5 (C)</PassingGrade>
Integrated verifier aperture size measured.
Example:
<hardwareAperture>4.4 mils</HardwareAperture>
Date when the label is printed
Format: YYYYMMDD
Example:
,Date>20180320</Date>
Time when the label is printed
Format: HHMMSS
Example:
<Time>131120</Time>
Last verifier calibration date "Expired" will be indicated if
the last calibration date is past the duration determined
by the design.
Format: YYYYMMDD
Example:
<CalibrationDate>20180320</CalibrationDate> or
<CalibrationDate>Expired</CalibrationDate>
Indicate the lowest grade of the barcode in the label
Example:
<LabelGrade>3.3 (B)</LabelGrade>
Verification status for the label, Pass or Fail
Example:
<LabelStatus>Pass</LabelStatus>
Reason for failed label.
Example:
<FailureReason>Barcode verification fail</FailureReason>
51