Download Print this page

H-KING Yak54 Instruction Manual

Download this manual

INSTRUCTION M ANUA L

Page 1 INSTRUCTION M ANUA L...
Page 3: Packing List
Packing list: 1: EPP Yak54 fuselage *1 2: Carbon tube 4*4*750mm *1 3: Pull rod *4 4: Motor mount *1 5: Quick rod adjuster *4 6: Hinge *4 7: Hook and loop tape *1 8: Wood strips *4 9: Landing gear *1 Tools: 1: 1.5mm allen wrench...
Page 4 Assemble the 2 pcs wings on horizontal fuselages Install the carbon tube on fuselage using foam glue. using foam glue. Assemble the horizontal tail on fuselage using foam Wait glue dried. Then assemble bottom half fuselage glue. into the horizontal fuselage using foam glue. Must check whole fuselage to ensure orthogonality Electrify all servos to make sure the arm perpendicular before glue dry.
Page 5 Assemble the upper half vertical fuselage on horizontal Assemble the vertical tail on upper half vertical fuse- fuselage using foam glue with l-square. lage using foam glue with l-square. Glue bottom half vertical fuselage on horizontal Drill a hole in fuselage under aileron servo and let the fuselage with foam glue.
Page 6 Install pull rod on servo and hinge, then adjust the Install 2pcs 4.5/4.7g servo on fuselage with long arm rod’s length. using foam glue Install hinge into the hole on tail aileron (Need cut the Install wood strip in the hole using No.502 glue. Notice hinge a little).
Page 7 Same way to install receiver and battery on fuselage C of G is on the wing as shown in the picture above. behind ESC. EPP Yak54 is a very good plane for F3D and F3P flying. It’s strong and easy to fix.