Advertisement
Assemble the upper half vertical fuselage on horizontal
fuselage using foam glue with l-square.
Glue bottom half vertical fuselage on horizontal
fuselage with foam glue.
Adjust landing gear to make sure the wing be horizon-
tal and then glue the hole.
Assemble the vertical tail on upper half vertical fuse-
lage using foam glue with l-square.
Drill a hole in fuselage under aileron servo and let the
2 pcs landing gears cross through the hole. Then glue
landing gear on wing using No.502 glue.
Assemble quick rod adjuster and install it on hinge
(Notice the direction), apply a little No.502 on the nuts.
Then install hinge into the hole on aileron with
No.502 glue.
3
Advertisement
