Deletion Of Id - Panasonic Attune WX-C3010 Installation Instructions Manual

• If ID registration is performed for 2 or more headsets, follow the steps 2-4 individually.

4.2.5 Deletion of ID

To delete the registered ID of All-in-One Headset, follow the steps below.
1. Hold down the POWER button for more than 2 seconds to turn off the power of All-in-On-Headset.
2. To delete an ID that is registered for LANE A, keep pressing the T1 and C buttons simultaneously and start up the power
of All-in-One Headset. To delete an ID that is registered for LANE B, keep pressing the T2 and C buttons simultaneously
and start up the power of All-in-One Headset. The power indicator then blinks in yellow.
3. Press the P button while the power indicator keeps blinking in yellow. The ID that is registered for LANE A (or LANE B)
is deleted.
4. The power indicator turns to blinking in red. A message of "ID is not registered" is heard from the All-in-One Headset
speaker.
Order Taker Unit
(WX-T3020)
Order Taker Unit
(WX-T3020)
Order Taker Unit
(WX-T3020)
All in One Headset
(WX-H3050)
All in One Headset
(WX-H3050)
All in One Headset
(WX-H3050)