Panasonic Attune WX-C3010 Installation Instructions Manual page 26

4. If ordered, mount Vehicle Detector near the Center Module. Make sure the AC cable will reach the outlet.
5. INSTALLERS NOTE: Most new speaker posts have internal positions to mount both speaker and microphone. For
these installations we recommend using 2 of the WX-C550 speaker's for best overall clarity. For these type installations
see instructions.
(A) For older speaker box installation where their is no room for a second internal. WX-C550 speaker see installation
instructions.
(B) Install the WX-C550 used as microphone in the top place provided, this location is usually the closet location on the
speaker post to the customer cars driver window. Position the microphone up to the speaker box grill area. It is important
to pack acoustic installation around the microphone to prevent echo and feedback from the speaker. Install the second
WX-C550 as speaker in the lower section of speaker post. If possible pack acoustic insulation around the speaker. Float
the microphone in the acoustic material. Do not let the speaker touch the speaker post housing.
(C) The larger WX-C550 speaker is used as a microphone. The WX-C550 is not a waterproof speaker and must be
mounted in the space provided inside the menuboard or speaker post. The smaller WX-C1050 is the waterproof
speaker. This speaker will be mounted outside underneath the microphone. Make sure the acoustic installation is
installed in the WX-C550 after mounting.
6. The Panasonic WX-C688 supplies all the cables needed for installation and are fire rated CL-2 to meet zoning
requirements.
7. Close up the speaker post.