Center Module Greeter Setting - Panasonic Attune WX-C3010 Installation Instructions Manual

6.3 Center Module Greeter Setting

When the customer approaches the menu board, the
voice message recorded in the Center Module is
automatically output to the outside speaker. The Center
Module has two memories, and you can select either
message.
[Method of recording message]
1. Press the Greeter ON/OFF Button of the Center
Module. The Greeter ON/OFF Indicator will light in
yellow.
2. Press the Greeter Memory Select Button of Center
Module and select the memory 1 or 2.
3. Press the Greeter Record Button of Center Module.
The Greeter Record Indicator will light in red.
4. Hold down the PAGE button at the PTP setting. Press
the PAGE button at the PAGE LOCK setting. A message
can be recorded for 16 seconds at the maximum.
5. Release the PAGE button at the PTP setting. Press the
PAGE button again at the PAGE LOCK setting. When
recording is complete, one each of the recorded
messages is soon reproduced thereafter.
Notes:
• At the time of shipment from the factory, a message of
"Please pull forward" is recorded in Message 1. If any
recording is performed on Message 1, the original
message will be overridden by the new message.
• No recording is possible during Greeter reproduction.
• It must be noted that the talking sound is also recorded
if TALK operation is attempted during recording.
[Output setting of Greeter]
1. Press the Greeter ON/OFF Button of the Center
Module. The Greeter ON/OFF Indicator will light in
yellow.
2. Press the Greeter Memory Select Button of the Center
Module, and select the memory 1 or 2.
3. Press the Greeter Playback Button of the Center
Module, and set the output level of message to the
optimum level by the Greeter Output Level DOWN/UP
Buttons.
4. Set the output destination of the message.
• Output to the auxiliary speaker
Press the Greeter Output Auxiliary Speaker Button of
the Center Module. The Greeter Output Auxiliary
Speaker Indicator will light in green.
• Output to the Headset
Press the Greeter Output Headset Button of the
Center Module. The Greeter Output Headset Indicator
will light in green.