Panasonic Attune WX-C3010 Installation Instructions Manual page 41

1. Press the power button for 2 seconds or more to turn off the headset.
2. Set the switches as follows.
SW#1: This switch selects Auto Talk Lock ON/OFF
ON: Auto Talk Lock ON
OFF: Auto Talk Lock OFF
SW#2: This switch selects the target lane for "SW#1:Auto Talk Lock".
ON: Lane B
OFF: Lane A
SW#3: This switch selects Direct Lane Select Mode or Normal.
ON: Direct Lane Select Mode When double-drive-thru, the T1 button is for lane A, the T2 button is for lane B.
OFF: Normal For double-drive-thru, the T2 button is A/B Lane Selection.
SW#4: This switch selects Talk Lock or Press-To-Talk
ON: Talk Lock
OFF: PTT (Press-To-Talk)
SW#5: This switch selects Page Lock or Press-To-Page.
ON: PAGE Lock
OFF: PTP (Press-To-Page)
SW#6, SW#7: This switch selects language of Voice Prompt.
NOTE : The initial setting is marked with an asterisk *.