Series d/a airless paint sprayer, electric, 120 vac, 2750 psi (19.5 mpa, 195 bar) maximum working pressure, standard mount; complete sprayer with hose, gun, rac iv dripless tip guard and switchtip (36 pages)
D This equipment is for professional use only. D Read all instruction manuals before you operate this equipment. D Use the equipment only for its intended purpose. If you are not sure, contact your Graco distributor. D Do not alter or modify this equipment.
Page 3
WARNING – Do not drain caustic or flammable products. – Do not expose the tank to any source of heat. – Do not do any welding on the tank. – While draining high temperature oils, keep hands and face protected. United States Government safety standards have been adopted under the Occupational Safety and Health Act.
Assembly and Operation 8 psi (0.5 bar, 50 kPa) 309042...
Page 5
Assembly and Operation ASSEMBLY 1. Fig. 6. To raise and lower funnel, loosen ring nut M and hand tighten after reaching desired height. 1. Fig. 1. Insert handle into holding fixtures provided on tank and secure it with screws. Place tool tray A on bracket provided.
Parts List and Drawing Oil Ace Pressurized Oil Drain, Model 115599, Series A Note: part numbers in illustration locate repair kits listed on page 7. 242039 242032 (242033) 5 (242033) 7 (242034) 242037 242041 242035 242038 242042 242036 242031 242030 9426A Ref.
Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.