Advertisement
Quick Links
Operating Instructions
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
INSTRUCTIONS
Pressure Roller
Model 243066, Series A
D 20 in. (50 cm) heavy-duty extension
D 45_ swivel adapter
D 9 in. (23 cm) roller frame
D 1/2 in. (13 mm) nap roller cover
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure
*
This maximum pressure is only possible if the roller frame is
completely plugged. The best operating pressure is the lowest
pressure that provides an even paint supply to the roller and
typically does not exceed 300 psi (2.1 MPa, 21 bar).
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
*
ECOPYRIGHT 2000, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
Airless spray
gun not included
309047
Rev. A
9593A
Advertisement
Related Manuals for Graco 243066
Summary of Contents for Graco 243066
- Page 1 READ AND KEEP FOR REFERENCE. INSTRUCTIONS Pressure Roller Model 243066, Series A D 20 in. (50 cm) heavy-duty extension D 45_ swivel adapter D 9 in. (23 cm) roller frame D 1/2 in. (13 mm) nap roller cover 3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure...
- Page 2 Warnings and Cautions WARNING EQUIPMENT MISUSE HAZARD Misuse can cause the equipment to rupture or malfunction and result in serious injury. To help prevent injury D Do not modify the extension tube or roller frame or use parts not designed for this equipment.
-
Page 3: Parts List
9 in. (23 cm); 3/4 in. (19 mm) nap 107592 9 in. (23 cm); 1-1/4 in. (32 mm) nap Parts Drawing Pressure Roller, Model 243066, Series A retaining nut HINT: When replacing gasket (2*) and o-ring (3*) in swivel adapter (7), position o-ring first, then press gasket into place. - Page 4 Graco Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.