Advertisement
Quick Links
Mocka Kitchen
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
28x long
12x
screw
screw
screw
G
H
I
22x
4x
4x roller
dowel
latch
catch
Phillips screwdriver and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
C
D
E
4x
1x
54x small
hinge
screw
J
K
L
8x
8x shelf
2x
wedge
support
clip
Hardware Supplied
P
F
1x
4x
screw
hinge
Q
M
1x
4x
spacer
hook
R
1x wall
ancho
Wall
Attachment
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
WARNING:
Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts
to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices
from those supplied.
r
1
Advertisement
Related Manuals for Mocka Kitchen
Summary of Contents for Mocka Kitchen
- Page 1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. use of a power drill on a low-speed setting. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Attach 2x shelf support (K) to panel [7] with 2x screw (D). and [22]. Attach 2x clip (L) to panel [26]. Attach panel [26] to panel [8] with 2x screw (A). Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 (K) with 2x screw (D). Attach 2x shelf support (K) to panel [22] with 2x screw (D). Tighten all screws with a screwdriver. Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panel [8] to panel [9] with 2x screw (A). Attach panels [6] and [11] to panel [9] with 4x screw (A). Tighten all screws with a screwdriver. Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach 8x wedge (J) to panel [13] with a hammer and secure with 8x Slide panel [28] into the back panels [6] and [8]. screw (D). Attach panel [23] to panel [13] with 1x screw (C). Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Attach panel [14] to panel [16] with 1x screw (A). Attach panel [15] to panel [16] with 1x screw (A) and insert panel [18] Tigthen all screws with a screwdriver. into panel [14]. Tighten screw with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Insert panel [17] into the back of panels [14] and [15]. Attach panel [19] to panels [14], [15], [20] and [22] with 4x screw (A). Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Attach panel [25] to panel [10] with 2x screws (B). Attach hinge (F) to panel [10] with 2x screws (D). Tighten all screws with a screwdriver. Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 Attach panel [13] to panels [6], [8] and [11]. Attach panel [13] to panel [8] with 2x screws (A). Attach panel [13] to panels [6] and [11] with 4x screws (B). Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 10 Tigthen all screws with a screwdriver. Attach panel [24] to panel [10] with 2x screws (B). Slide panel [5] onto shelf supports (K) on panels [7] and [11]. Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 11 Attach 1x latch (H) to panel [3] with 2x screws (D). Tighten all screws with a screwdriver. Attach panel [24] to panel [3] with 2x screws (B). Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 12 Attach hinge (E) to panel [3] with 2x screws (D). Attach panel [25] to panel [4] with 2x screws (B). Tighten all screws with a screwdriver. Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 13 Place 4x hook (M) onto panel [18] and place 4x panel [33] onto 4x Slide panel [21] onto shelf supports (K) on panels [20] and [22]. hook (M). Tighten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 14 Push panel [30] into the lever on panel [31] to dispense panel [32]. hole lining up with the hole in panel [17]. Fasten to wall using 1x wall anchor (R), 1x spacer (Q) and 1x screw (P). Ensure kitchen is balanced and steady before use. You’re done, enjoy...
Need help?
Do you have a question about the Kitchen and is the answer not in the manual?
Questions and answers