4KX Series Audiokit Wiring Guide Line All intercoms wiring must run separately from the mains cable. The cable type should be CW1308 or an equivalent cable. The cable size should comply with the table below. DISTANCE METERS CABLE SIZE (MM 0.35 0.75 Max resistance of all lines: 8 Ohm...
Page 4
4KX Series Audiokit 4000 Series Surface and flush mounting door station installation EXAMPLE: INSTALLING A FOUR MODULE OUTDOOR STATION fig. 1 fig. 2 fig. 3 fig. 4 fig. 5 fig. 6 fig. 7 fig. 8 fig. 9 fig. 10 fig. 11 fig.
Page 5
4KX Series Audiokit 4000 Series Surface and flush mounting door station installation INSTALLING A SURFACE MOUNT DOOR STATION 1. Place the surface box against the wall (165-170cm between the top of the box and the floor level as shown in Fig. 1) and mark the fixing holes for the wall plugs and the hole for the cables E (fig. 2).
Need help?
Do you have a question about the Vproxphone Kit 4KX Series and is the answer not in the manual?
Questions and answers